What should I upgrade next to improve my cars suspension for the track? I run big and littles at the track and a 28" stiff wall slick. I have a tru trac in the rear and moser axles. I run a bmr upper control arm mount and use the lower mounting hole to improve instant center. I also run a jpc double adjustible upper control arm and stock lowers. Also im using a dss aluminum driveshaft. I still run the front sway bar.
The best 60ft to date is a 1.48 with 12 psi no nitrous and a 1.35 with 10 psi and a 100 shot spraying on green.
So what should i do next? I was thinking cj springs but i dont want my car to sit higher then stock. I am also thinking about a rear anti roll bar and just cutting my stock rear springs to lower the rear about a half inch to help weight transfer. I would like to see 1.3 short times with out nitrous.
The best 60ft to date is a 1.48 with 12 psi no nitrous and a 1.35 with 10 psi and a 100 shot spraying on green.
So what should i do next? I was thinking cj springs but i dont want my car to sit higher then stock. I am also thinking about a rear anti roll bar and just cutting my stock rear springs to lower the rear about a half inch to help weight transfer. I would like to see 1.3 short times with out nitrous.