Couple of Saleen engine bay shots.

00WHTSC281

New Member
Established Member
Joined
Jul 10, 2012
Messages
187
Location
Ohio
uzu4erab.jpg
jyna2y4y.jpg

Sent from my HTC Glacier using Tapatalk 2
 

00WHTSC281

New Member
Established Member
Joined
Jul 10, 2012
Messages
187
Location
Ohio
Got a new tune in colder whether. Made 330 in 100 degree heat. With temps in the 40s and packed with ice I made 361rwhp! Not bad for a M90! I also added a intake.

Sent from my HTC Glacier using Tapatalk 2
 
Last edited:

thepizz

OP is a good person
Established Member
Joined
Oct 12, 2009
Messages
5,419
Location
North New Jersey
Got a new tune in colder whether. Made 330 in 100 degree heat. With temps in the 40s and packed with ice I made 361rwhp! Not bad for a M90! I also added a intake.

Sent from my HTC Glacier using Tapatalk 2

What series is the blower? I'm running a series 4 with stock motor and I put down 405hp with 7psi on a safe tune.

Btw, the blower looks real nice. What paint is that?
 

00WHTSC281

New Member
Established Member
Joined
Jul 10, 2012
Messages
187
Location
Ohio
Series I blower. Its ported with a 66mm pulley. I would make 400rwhp if I switched to the series IV.

Sent from my HTC Glacier using Tapatalk 2
 

thepizz

OP is a good person
Established Member
Joined
Oct 12, 2009
Messages
5,419
Location
North New Jersey
Series I blower. Its ported with a 66mm pulley. I would make 400rwhp if I switched to the series IV.

Sent from my HTC Glacier using Tapatalk 2

That's why I upgraded a few years ago. Bought mine from Joe G at Chicane. He did some port work on it and I have one of his smaller pulleys but I never put it on.
 

00WHTSC281

New Member
Established Member
Joined
Jul 10, 2012
Messages
187
Location
Ohio
And that paint? It looks great.

Thanks! When I had it off getting ported I also painted it. Id have to ask my painter what the actual color was. It helps set the engine bay off being fresh.

Sent from my HTC Glacier using Tapatalk 2
 
Last edited:

thepizz

OP is a good person
Established Member
Joined
Oct 12, 2009
Messages
5,419
Location
North New Jersey
Thanks! When I had it off getting ported I also painted it. Id have to ask my painter what the actual color was. It helps set the engine bay off being fresh.

Sent from my HTC Glacier using Tapatalk 2

Painted in a body shop or powder coated? I need to refinish mine this winter. But I'll probably keep it black.
 

00WHTSC281

New Member
Established Member
Joined
Jul 10, 2012
Messages
187
Location
Ohio
It was power coated. The color was almost stock, just a little darker.

Sent from my HTC Glacier using Tapatalk 2
 

Users who are viewing this thread



Top