This is probably not new to most of you, but for the few, it might be of use. My pedal started grabbing right at the floor recently. It's only got 22K on the clock, but it's been open tracked at the Glen several times. I'm hoping it's not the clutch in need of replacement. Anyways, as a quick fix I popped a couple teeth on the quadrant gear and now it's grabbing almost in the middle of the pedal travel. There's a tech article on Corral.net on doing this. Clutch Adjustment The easiest is to push down the pedal a little, hold the quadrant gear with your thumb and let go of the clutch. Once you locate the quadrant gear by feel, it's 2 second procedure. Hope this helps someone.
Edit: It was the '89 I did the adjustment on, not the R in my avatar. I'm guessing the SN95s are the same though.
Edit: It was the '89 I did the adjustment on, not the R in my avatar. I'm guessing the SN95s are the same though.
Last edited: