Cammed Mach 1 - Need help

[sonic_4.6]

A Mach 1 came into my friends shop today, and he is looking for the right parts to get his car running right. He is running Comp XE278AH-114 cams with 242/240 Duration @ .050. & .475-.450 lift. The car has a bigger throttle body, full exhaust, some head work apparently, and a fresh stroker short block.

I need to know what injectors to use with this setup, along with a MAF, fuel pump, and anything else that needs to be upgraded. Thanks for any help guys!

:beer:

 

[speedofsound]

Sounds like everything you listed can stay stock.

 

[sonic_4.6]

The stock MAF, fuel pump, and injectors won't be an issue?

 

[dan03mach]

The only thing he needs really is a good tune. I have the Come XE 274 cams and I'm running the stock maf, injectors, and fuel pump. but my car is also an 8.6:1 compression motor too. It is build for boost I just haven't put the turbo on it yet.

 

[sonic_4.6]

Thanks for the info, guys. I'll just send him down to my tuner for a good tune and see what happens.

 

[na svt]

If the motor makes the power it is capable of it will need 30s and that comes from experience. The 24s will be running near their limit and it's never good to run them close to 100% duty cycle.

 

[blackmagicmach]

hell a used set of cobra injectors a svt focus pump and if you want a L MAF and hell be all set.....