My wife bought me a set of Comp Cams and Manley springs for the L for christmas. I am not a cam or spring expert, so I want to see if someone here can tell me if this set up will work. By the way she bought the cams from a friend on mine who had them custom cut, he had a Lightning for a short period of time. But i do not know if they was cut for his L or his cobra. We no longer speak so i don't know. Ok heres the cam specs:
Comp Cams
Gross Valve Lift Intake .545 Exhaust .545
Duration @ .006 Tappet Lift Intake 261 Exhaust 281
Valve Timing OPEN CLOSE
@.050 INT 3- BTDC 49 ABDC
EXH 59 BBDC 7 ATDC
These specs are for cam installed @116.0 intake center line
INTAKE EXHAUST
Duration @ .050 226 246
Lobe Lift .5450 .5450
Lobe Seperation 116.0
Now the springs:
Manley Nextex Springs
1.125" Single
INST. 95 LBS at 1.680
OPEN 240 LBS at 1.130
Coil Bind 1.080
I called Comp Cams they said these cams will work in my truck. He said he did not know the dish on a stock piston on our trucks , so he said they might have valve and piston clearence issues. He said the cams are cut to make power from 1,500 rpm's to 6,000 rpm's.All my mods are in my sig. and i presently seeing about 17 pounds of boost. And yes i'm on my stock block, with stock heads. So what you think, good setup or what? Thanks :beer:
Comp Cams
Gross Valve Lift Intake .545 Exhaust .545
Duration @ .006 Tappet Lift Intake 261 Exhaust 281
Valve Timing OPEN CLOSE
@.050 INT 3- BTDC 49 ABDC
EXH 59 BBDC 7 ATDC
These specs are for cam installed @116.0 intake center line
INTAKE EXHAUST
Duration @ .050 226 246
Lobe Lift .5450 .5450
Lobe Seperation 116.0
Now the springs:
Manley Nextex Springs
1.125" Single
INST. 95 LBS at 1.680
OPEN 240 LBS at 1.130
Coil Bind 1.080
I called Comp Cams they said these cams will work in my truck. He said he did not know the dish on a stock piston on our trucks , so he said they might have valve and piston clearence issues. He said the cams are cut to make power from 1,500 rpm's to 6,000 rpm's.All my mods are in my sig. and i presently seeing about 17 pounds of boost. And yes i'm on my stock block, with stock heads. So what you think, good setup or what? Thanks :beer: