MAKING SPACE IN THE GARAGE FOR A COUPLE OF MY BUILDS…
1987 Foxbody Project (Terminator swap or Coyote) was building for street & strip)
-Full UPR suspension
-K member
-Tubular control arms
-Vikings Double adjustable coil overs front and back
-2003-2004 Spindles
-2003-2004 Hydroboost
-Adjustable rear upper control arms
-Adjustable rear lower control arms
-Prince Customs Rear torque box replacement and reinforcement with Adjustable Mounting locations.
-Extreme Street Anti Roll Bar
-Built 8.8
-Axles
-4:10 Gears
-Shortened 1 inch each side
-Tru-trac
-tubes straightened & welded
-RING & PINION WERE CRYO TREATED & POLISHED…
-Full strip, cleaning, prep and Paint underneath (Flat Black)…
-Through the floor subframe connectors
-Full strip, cleaning, prep and coating inside.
-3 different coats of sound deadening and vibration deadening.
-Siless Sound deadening Material applied last
-Way too many hours spent on the engine bay inside and out of it.
- All holes have been filled and panels have been Smoothed, Prepped and painted.
-6 Piston Wilwood Big Brakes front
-Wilwood Rear Brakes
-All New Brake Lines
balanced & just picked up from Machine Shop… Ready to build
Teksid Block
03-04 Cobra Crank
Manley Rods
CP pistons 10:5.1 with 4 valve 52cc heads rings and pins
Clevite bearings
DC heads (ported,valve job,cams & etc)
All Arp hardware for Everything
Whipple Gen5 3.0 Brand New in Box
ID1700’s & ID1300’s
A WHOLE BUNCH MORE PARTS
LOOKING TO TRADE FOX COUPE FOR A TERMI or TERMI PROJECTS???
1991 Fox Calypso Coupe Roller (No Engine) in primer
Complete Black interior
Clean title comes with lots of parts that are Not installed…
Built 8.8, 4:10, STRANGE AXLES, Tru Trac, extended studs…
2003-2004 cobra spindles
2003-2004 cobra front brakes
2003 2004 cobra hydro boost
QA1 k member
QA1 tubular front lower control arms
QA1 front struts and coil overs
QA1 rear coil overs
QA1 adjustable rear upper control arms
QA1 adjustable rear lower control arms
And many more parts …..
perfect Candidate for a Coyote Swap…
-Recarro seats from 2017 GT Black
No rips or tears 2250 + shipping or will throw in with one of the cars on a deal.
-Original black fox coupe seats in great shape
Fronts 1000 + shipping
1965 coupe Forest Green
Fresh paint, 302, c4, interior and upgraded suspension. 85% complete and will be done in the next month. Looking to trade for a Lower mile 03-04 cobra. No Convertibles.
Forgetting a lot I’m sure. PM if interested in anything. Thank you
1987 Foxbody Project (Terminator swap or Coyote) was building for street & strip)
-Full UPR suspension
-K member
-Tubular control arms
-Vikings Double adjustable coil overs front and back
-2003-2004 Spindles
-2003-2004 Hydroboost
-Adjustable rear upper control arms
-Adjustable rear lower control arms
-Prince Customs Rear torque box replacement and reinforcement with Adjustable Mounting locations.
-Extreme Street Anti Roll Bar
-Built 8.8
-Axles
-4:10 Gears
-Shortened 1 inch each side
-Tru-trac
-tubes straightened & welded
-RING & PINION WERE CRYO TREATED & POLISHED…
-Full strip, cleaning, prep and Paint underneath (Flat Black)…
-Through the floor subframe connectors
-Full strip, cleaning, prep and coating inside.
-3 different coats of sound deadening and vibration deadening.
-Siless Sound deadening Material applied last
-Way too many hours spent on the engine bay inside and out of it.
- All holes have been filled and panels have been Smoothed, Prepped and painted.
-6 Piston Wilwood Big Brakes front
-Wilwood Rear Brakes
-All New Brake Lines
balanced & just picked up from Machine Shop… Ready to build
Teksid Block
03-04 Cobra Crank
Manley Rods
CP pistons 10:5.1 with 4 valve 52cc heads rings and pins
Clevite bearings
DC heads (ported,valve job,cams & etc)
All Arp hardware for Everything
Whipple Gen5 3.0 Brand New in Box
ID1700’s & ID1300’s
A WHOLE BUNCH MORE PARTS
LOOKING TO TRADE FOX COUPE FOR A TERMI or TERMI PROJECTS???
1991 Fox Calypso Coupe Roller (No Engine) in primer
Complete Black interior
Clean title comes with lots of parts that are Not installed…
Built 8.8, 4:10, STRANGE AXLES, Tru Trac, extended studs…
2003-2004 cobra spindles
2003-2004 cobra front brakes
2003 2004 cobra hydro boost
QA1 k member
QA1 tubular front lower control arms
QA1 front struts and coil overs
QA1 rear coil overs
QA1 adjustable rear upper control arms
QA1 adjustable rear lower control arms
And many more parts …..
perfect Candidate for a Coyote Swap…
-Recarro seats from 2017 GT Black
No rips or tears 2250 + shipping or will throw in with one of the cars on a deal.
-Original black fox coupe seats in great shape
Fronts 1000 + shipping
1965 coupe Forest Green
Fresh paint, 302, c4, interior and upgraded suspension. 85% complete and will be done in the next month. Looking to trade for a Lower mile 03-04 cobra. No Convertibles.
Forgetting a lot I’m sure. PM if interested in anything. Thank you
Attachments
-
A46C60C9-3E8A-482A-A6A6-353A970650ED.jpeg -
14E2A2FA-6F40-43E8-981F-140577C91322.jpeg -
4F23CECE-97EB-4EC9-8874-197396F235C5.jpeg -
E68159BF-174C-4AE7-8F56-124CB0A1C1C7.jpeg -
A732ED60-220F-4462-9CBD-36505A162475.jpeg -
56332618-2F42-46FB-B13D-39E25783D63A.jpeg -
A74FCE78-C3CE-435C-9C97-829F27E3323B.jpeg -
92AF634F-8ACD-41FA-BE21-74F147105990.jpeg -
4A49513D-327A-4AA9-A728-00B96B68D9FF.jpeg -
36915282-46E5-4DAD-B130-6CDB84F41401.jpeg
Last edited:
