So I noticed today there was some fluid on my RR rim, almost clear but slightly amber. Not a lot, but it leaves tracks on the rim and tire. Some on the rotor surface also. Looked on the other rim (LR) and it had similar fluid.
Pulled both rear rims off to investigate, right side had some fluid stain on the coil spring but no evidence of where it came from, doesn't appear to be from the hose or caliper.
Left side did have a little on the caliper/pad but it's the outside surface, not the inner. Master cylinder is full.
No idea why both would leak at the same time. FYI I had my rear brakes (pads) done 18 months ago and also a brake fluid flush. Had fronts done just 2 months ago, but they had no reason to bleed them just to install pads and turn rotors.
Any ideas what could be going on? I've already put the wheels back on, but I guess I should have looked for bleeder screws to see if they are tight? Where are they? I'm open to other ideas before I take it back to the shop...
Pulled both rear rims off to investigate, right side had some fluid stain on the coil spring but no evidence of where it came from, doesn't appear to be from the hose or caliper.
Left side did have a little on the caliper/pad but it's the outside surface, not the inner. Master cylinder is full.
No idea why both would leak at the same time. FYI I had my rear brakes (pads) done 18 months ago and also a brake fluid flush. Had fronts done just 2 months ago, but they had no reason to bleed them just to install pads and turn rotors.
Any ideas what could be going on? I've already put the wheels back on, but I guess I should have looked for bleeder screws to see if they are tight? Where are they? I'm open to other ideas before I take it back to the shop...