BMR LCA Poly bushing failed

[GrabUblue]

Anyone else had this happen? I have the spherical/poly lowers. They have about 3000 street miles and about 12 passes on them.
Launched around 4k, spun a little then it hooked in first. As soon as it hooked, it popped pretty bad. After making it back to the pits I inspected and see half of the bushing pushed out and sitting on top of the control arm?

I was on a 28x11.5 qtp, m6 car.

On a good note I got a new pb! Even with all the slop in the rear.

 

[BMR Tech]

Well, I am happy to know you got a NPB...but not happy about the bushing. ;(

Shoot me an email and I will get you a new set of bushings sent out.

If you have issues again, I highly suggest swapping to a bearing/bearing set-up with a manual trans car on sticky tires.