Looks like you are making a blower inlet elbow for the TVS cars. Does this also include Roush Blowers or is this just for gt500 TVS? If so, have you seen 20-40hp on this application?
Blower Inlet Elbow
- Thread starter sambandit
- Start date
We are, the elbow fits 5l as well
Any HP gains from elbow only on an otherwise stock Roush blower?
Some.... As in less than 10 at the tires. It's designed to work at full capacity and benefit with our Twin Jet 67mm throttle body. That combo makes +/- 40 rwhp over stock
Makes sense. Do you also rework the twin 67 a little as I already have that part installed....?
Hi, the vmp 67mm bolts up to the vmp high flow elbow perfectly.
What kind of gain is to be expected from the 67 twin jet & elbow on lower boost levels, say around 9.5#? Does it only benefit higher boost levels? does it lower or raise the current boost level since it's opening up a restriction?
It will slightly increase boost, but not noticeable. At lower boot levels, figure about 20-30hp/tq, more as you go higher in booost. 9.5psi is still very mild. You will also hear the blower whine a lot more.
not really a driving factor lol, but how much louder will it be?
Users who are viewing this thread
