Billet oil catch can with Braided stainless lines. Pics

[Dalpilot]

Billet breather catch can with Braided stainless lines. Pics

Couldn't stand the stock lines or the look of the catch cans I saw. So I made my own with braided stainless lines. I will do the drivers side line in stainless line and fittings next.

 

[Dalpilot]

Now it is time to clean under the hood......yuck.

 

[Tuffnuts23]

where did you get the PCV/AN fittings from?

 

[Dalpilot]

Cut and tapped the PCV fittings I bought online, the fittings are from Jegs.

 

[Tuffnuts23]

Cut and tapped the PCV fittings I bought online, the fittings are from Jegs.

Well played. Looks good, I think I may do the same. So what was the union you tapped into the PCV fitting? 3/4"NPT to 12AN?

 

[Dalpilot]

1/4 npt to -8.

 

[Tuffnuts23]

Thank you

 

[Bullitt 3309]

Looks good, doing mine in black line

 

[SID297]

Looks good, but I'd ditch the brass fittings.

 

[Dalpilot]

They are actually nickle, not brass, just look brass in the pics.

 

[Dalpilot]

Finished the drivers side.

 

[01svtL]

Ok, I have absolutely no idea what I'd need to do this myself, but definitely like the idea. I'd like to do it with black lines and all red fittings to match my car. When you get a little time, can you PM me the list of parts that you bought?

 

[Dalpilot]

2 feet of -8 lines, 1/4 npt to -8 fittings. -8 hose ends to make your hoses. Cut the oem pcv fitting at the last barb. CAREFULLY drill and tap using a 1/4 npt tap. Use some thread sealer and thread the 1/4 npt to -8 fitting in the oem pcv fitting.

Pretty easy and quick, just be careful. I would order a new line before you start in case you screw it up so you can still return it ti stock. Rockauto.com has them cheap.

I already had the catch can but you can find fittings to fit whichever you get. Just make sure they are all -8 line on the hose sides.

We have the same car and I wanted all red fittings. I failed in finding them. Aeroquip has the closest matching color red.

 

[Dalpilot]

If you are using black hose you can use these. Perfect!

http://www.jegs.com/p/JEGS-Performa...ttings-Red-Black-Elite-Series/830891/10002/-1

 

[SignalZero]

where did you get the PCV/AN fittings from?

http://www.svtperformance.com/forum...421-Make-stock-PCV-connectors-AN-friendly-5-0

I made a thread a little while back. Should help some