• Welcome to SVTPerformance!

Base E85 mods 04 cobra

Discussion in 'The Distillery' started by Mustangfan0211, Nov 8, 2016.

  1. Mustangfan0211

    Mustangfan0211 NO IT'S NOT A WRAP ! Established Member

    Messages:
    90
    Joined:
    Feb 16, 2015
    Location:
    central Jersey
    Hi ive been searching the forms and havent found exactly what im looking for, what is the most budget friendly way to run e85 on a pullied 04 cobra and with budget in mind what pumps injectors do you guy suggest etc... thank you
     
  2. 2000GTSTANG

    2000GTSTANG Well-Known Member Established Member

    Messages:
    1,580
    Joined:
    Nov 26, 2006
    Location:
    Plymouth, MI
    Id use either two 340lph DeatshWerks pumps or two AEM 320lph pumps, modified fpdm, and 80lb injectors.
     
  3. MG0h3

    MG0h3 Premium Member Premium Member Established Member Established Member

    Messages:
    6,495
    Joined:
    Jul 23, 2014
    Location:
    El Paso, TX
    Ill recommend what I did because Im a tight a$$ but I wont cheap out if itll cause me more work later or not be something solid to build on. You are NOT going to want to have to rerun or configure your lines later.

    I used a vendor here and we pieced together components that is similar to the FORE level 1E kit.

    465s
    8 feed/return
    stock rails (cost is the same to do them now or later but id have to pull the blower to install them so I didnt do it)
    regulator
    2 8$ relays from summit
    hobbs switch

    I already had the injectors so add that cost in. Think I spent like 1250.
     
  4. BLOWN9646

    BLOWN9646 E85 COBRA Established Member

    Messages:
    2,018
    Joined:
    Apr 12, 2006
    Location:
    N IL
    This, except you don't need 80's...even for a ported car.

    Edit: also run #8 wire to fuse box for battery
     
    Last edited: Nov 9, 2016
  5. Mustangfan0211

    Mustangfan0211 NO IT'S NOT A WRAP ! Established Member

    Messages:
    90
    Joined:
    Feb 16, 2015
    Location:
    central Jersey
    which injectors do you recommend ?

     
  6. 2000GTSTANG

    2000GTSTANG Well-Known Member Established Member

    Messages:
    1,580
    Joined:
    Nov 26, 2006
    Location:
    Plymouth, MI

    60's would be the next step down.
     
  7. Mustangfan0211

    Mustangfan0211 NO IT'S NOT A WRAP ! Established Member

    Messages:
    90
    Joined:
    Feb 16, 2015
    Location:
    central Jersey
    Ok thanks thats what i thought
     
  8. toby1234

    toby1234 Member Established Member

    Messages:
    442
    Joined:
    Jan 23, 2012
    Location:
    Los Angeles
    Would a single Walbro 400 lph pump be enough for a car like that? Im doing a swap into a 69 mustang and I'll be running a single pump set up. Return system. Should be similar to OP's car in that its just pullied.
     
    Last edited: Nov 10, 2016

Share This Page