Are Mach1 and 03 cobra cams the same?

[AJRED99]

Like the title says are they the same? Thanks!

 

[Boss75]

no

 

[AJRED99]

no

ok, what are the specs between the two?

 

[REX-RACER]

IIRC the exhaust side cams are different. I think they are similar to the 03/04 Cobra cams but I don't know the exact specs.

 

[Boss75]

I have no idea what exactly the specs are...you might get better answers in the Mach 1 or the Terminator sections though.

 

[na svt]

Yes, they are the same, exactly the same. The specs are:

Mach 1, 03/04 Cobra, Aviator, Marauder:
Intake: 184 deg @ .050"/.394" lift
Exhaust: 196 deg @ .050 / .394" lift

96-98 Cam Specs:
Intake: Primary Lobe 196 duration (at .050)/ 390 lift
Secondary Lobe 206 duration (at .050)/ 390 lift
Exhaust: 196 duration / 390 lift (at .050)


99/01 Cam Specs:
Intake: 194 duration (at .050) / 392 lift
Exhaust: 194 duration (at .050)/ 390 lift

 

[viperbluelx]

I have no idea what exactly the specs are...you might get better answers in the Mach 1 or the Terminator sections though.

Then why did you say they are different? :shrug:

Like na said, they are identical.

 

[na svt]

I have no idea what exactly the specs are...you might get better answers in the Mach 1 or the Terminator sections though.

But yet you stated that their spec's are not the same, hmmmmmmm.


It's crap like this that reduces the credibility of what's posted here on SVTP. If you don't know the answer, don't post one.





x

 

[Quadcammer]

as stated, all 03 4v motors used the same head and cam package (excluding the Ford GT, if that was out in 03)

 

[SKEETER_SVT01]

Thats some good info. Thanks

 

[REX-RACER]

But yet you stated that their spec's are not the same, hmmmmmmm.


It's crap like this that reduces the credibility of what's posted here on SVTP. If you don't know the answer, don't post one.





x

W'oh, okay I'm just gonna go ahead and apologize for bein' off the mark on this one . . .

 

[na svt]

W'oh, okay I'm just gonna go ahead and apologize for bein' off the mark on this one . . .

Your post was okay as you led into it by stating; IIRC (If I recall correctly). The other one that stated "no" was the post that I got irritated about.

 

[REX-RACER]

Your post was okay as you led into it by stating; IIRC (If I recall correctly). The other one that stated "no" was the post that I got irritated about.

Ah, thanx for the wiggle room . . . :-D

 

[Boss75]

But yet you stated that their spec's are not the same, hmmmmmmm.


It's crap like this that reduces the credibility of what's posted here on SVTP. If you don't know the answer, don't post one.





x

Ooookay....

Let me back up. Seeing as how this is the 99/01 forum I didn't read it well at first and assumed it was mach vs new edge cam. Secondly, I did reread it and saw that it was mach vs term cam, and didn't know the answer to that. Sorry I didn't write it perfectly and confused people. :shrug:

 

[Angus]

Like the title says are they the same? Thanks!

As stated above, all (4) cams are exactly the same no matter what '03/'04 4V they came from - Aviator/Cobra/Mach 1/Marauder.