5.4 swap ready to drop into a Mustang, pretty much just add wiring
.020 over 5.4 iron block
New forged FRPP crankshaft
New H beam rods w/ARP bolts
Full Shelby windage tray
New Forged pistons with CR of your choice up to 11:1
New rings
MHS regrind cams to match your CR
Cams degreed by MHS
New FRPP timing chains and tensioners
Rotating assembly balanced at local shop
Ported 99 Cobra heads
New guides and seals
Navi timing cover with tensioner and idlers
8 rib balancer
HV oil pump
Mustang oil pan
Coolant crossover for your application
Cam covers and coil covers (Blue cam covers available)
Aussie Boss lower intake
Modified Aussie Boss upper intake
Dual blade throttle body
New Motorcraft IAC valve
Alternator support bracket for your application
30# injectors
Fuel rail for your application
Throttle and cruise cable bracket
Throttle and cruise cables (OE Ford)
Mach 1 Air inlet hose
Mach 1 80mm MAF meter
AC kit (keep your stock hoses)
Drop engine mounts (Installed on block) for SN95/New Edge
Factory air cleaner housing w/ K&N air filter
8 Motorcraft COP coils
Autolite spark plugs
Oil system pressurized on the engine stand
Crank and cam sensors
K member spacers and bolts
Modified Mach 1 exhaust manifolds (installed)
Note, this motor has absolutely nothing to do with Modular Head Shop,
I just feel it's the best place around for the cams and other items,
and it is relatively local.
Allow 3-4 weeks for custom cam grinding
$6500 plus shipping to lower 48
Can deliver Free in South Florida
.020 over 5.4 iron block
New forged FRPP crankshaft
New H beam rods w/ARP bolts
Full Shelby windage tray
New Forged pistons with CR of your choice up to 11:1
New rings
MHS regrind cams to match your CR
Cams degreed by MHS
New FRPP timing chains and tensioners
Rotating assembly balanced at local shop
Ported 99 Cobra heads
New guides and seals
Navi timing cover with tensioner and idlers
8 rib balancer
HV oil pump
Mustang oil pan
Coolant crossover for your application
Cam covers and coil covers (Blue cam covers available)
Aussie Boss lower intake
Modified Aussie Boss upper intake
Dual blade throttle body
New Motorcraft IAC valve
Alternator support bracket for your application
30# injectors
Fuel rail for your application
Throttle and cruise cable bracket
Throttle and cruise cables (OE Ford)
Mach 1 Air inlet hose
Mach 1 80mm MAF meter
AC kit (keep your stock hoses)
Drop engine mounts (Installed on block) for SN95/New Edge
Factory air cleaner housing w/ K&N air filter
8 Motorcraft COP coils
Autolite spark plugs
Oil system pressurized on the engine stand
Crank and cam sensors
K member spacers and bolts
Modified Mach 1 exhaust manifolds (installed)
Note, this motor has absolutely nothing to do with Modular Head Shop,
I just feel it's the best place around for the cams and other items,
and it is relatively local.
Allow 3-4 weeks for custom cam grinding
$6500 plus shipping to lower 48
Can deliver Free in South Florida
