Alignment for the track?

[hollant]

I just built a 93 R clone to keep my 95 R company in the garage. I was wondering what you guys use as an allignment for the track. I understand that each car and set up will be different. My 93 is set up with a full KB track kit on it with offset rack and control arm bushings, lowering blah blah blah...

Anyway, I was thinking of starting with caster +3, camber -2.5 and zero toe.

Any thoughts?

Thanks, Troy

 

[racebronco2]

caster as much as you can get without taking away from your camber setting of 2.5 degrees ... 0 toe is good ..... my specs are 6.5 caster ... 1.5 camber o toe ... rear camber 1.1 ... but these are my street settings ... for the track i push the struts in and i can get 2.5 camber with 1/8 toe out

 

[SVT_KY]

All you ever needed to know about alignment specs