Anyone running aftermarket coil packs? I'm running tr7 plugs and at idle I get some what feels like misfiring. Tuner said something regarding the coil packs but I don't know squat about them.
Any brand suggestions?
Any brand suggestions?
Aftermarket coil packs?
- Thread starter TBCobra
- Start date
While they may be capable of firing a hotter spark, they generally are way more prone to failure than the OEM COPs. What are you gapping your plugs at? If you had a bad or misfiring COP, it would be way more obvious under load.
I had a shop do all the install including the plugs so I don't know what they were gapped at. The car runs perfect under load it's just at idle that I get the "misfiring", if you can call it that.
OEM Coil packs only.
Can you log the car to see which cylinder's causing the issue?
Can you log the car to see which cylinder's causing the issue?
Plugs are fine if . 028 to 18 psi. .026 to 21 . 024 to 23
No aftermarket coils. I've seen tons of issues with everything but Ford.
Sent from my [device_name] using the svtperformance.com mobile app
No aftermarket coils. I've seen tons of issues with everything but Ford.
Sent from my [device_name] using the svtperformance.com mobile app
I can log the car, what parameters should I be looking at?
Are tr7's too much for 650whp? Should I be at tr6's?
Also vmp recommended Brisk plugs, can't remember if it was the gr14ys's or the gr12ys's but the shop I used said always use the tr7's for my application.
@VNMOUS1 car has a 2.5 pulley and should only be making 15-16 psi.
I'm the one who emailed you this morning, btw.
Are tr7's too much for 650whp? Should I be at tr6's?
Also vmp recommended Brisk plugs, can't remember if it was the gr14ys's or the gr12ys's but the shop I used said always use the tr7's for my application.
@VNMOUS1 car has a 2.5 pulley and should only be making 15-16 psi.
I'm the one who emailed you this morning, btw.
Last edited:
Users who are viewing this thread
