Adjustable Rear Springs...Even out the Rake

[RC-5.0]

Got a set of Dead Hooker Springs on today from Revan racing..they are adjustable, So got the ride height where I want it.

 

[getTwisted]

Nice! Sits real good.

 

[TClark22]

front could come down

 

[Bert5.0]

Looks like the rear is lower than the front to me.

 

[RC-5.0]

front could come down

1. The front chin just barely clears parking stops/curbs
2. Lot's of speed bumps in my area and it's a pita if it's any lower.
3. The pics make the gap look bigger than it is..the gaps are within 1/16" of each other

Looks like the rear is lower than the front to me.

As above..looks skewed in the photos.

just under 28.5" front, just under 29" in the back

car is on sloped driveway.


Anymore criticisms?

 

[Mr.Bolt-on]

Yeah it probably needs the rake back just to even out the front.

 

[IamRacerX]

Imo these car are real difficult to get thevride height perfect. I am happy with mine for the most part, but I would like the front a little lower too. The only way to do it right is with adjustable coilovers.

 

[CobraBob]

Yeah, if you can afford coilovers that would be the best route. Adjust ability is nice.

RC-5.0, your car looks good, stance wise. I like it!

 

[RC-5.0]

Yeah it probably needs the rake back just to even out the front.

Front is liwer by .5". Gap only 1/16 difference

 

[RC-5.0]

Yeah, if you can afford coilovers that would be the best route. Adjust ability is nice.

RC-5.0, your car looks good, stance wise. I like it!

.
Thanks. I could open the back 1/4". I may do front coilovers if I decide to replace front susp. Wonder why so expensive.

 

[Torchy]

So the rear springs are adjustible? How does that work? Looks good btw.

 

[RC-5.0]

So the rear springs are adjustible? How does that work? Looks good btw.

http://cdn2.bigcommerce.com/server2...928/photo__16717.1378825418.1280.1280.JPG?c=2

The ride height adjusters sit on the spring perch and the springs sit on the adjusters (on the ring) The ring rotates on the threads up or down. It's a tall spring, so If you want more than a 1" drop, these will be too tall a spring.
RC