**9007 HID 8000k Headlight Write up/How To!!*PICS*
Hey guys. These are HID's from www.Freewaysport.com in C.A. (323)900-0486
They are Waterproof and Hard Rain or snow wont make them short out!
Replacement parts are also available just in case!
I paid $114.95 shipped. The Customer Service is great too!!
They are 8000k-Plug-n-Play, and they are a High/Low Beam kit. The High Beam is a Halogen (not a HID) for flashing other vehicles only. HID's take 10 seconds to warm up so flashing other cars wouldnt work to well with dual HID's. The Low Beam is bright enough for just about anybody!
Here are the goods!
Video Coming Soon!!
Notice I cleaned the wires up a little bit.
Pop off the radiator cover! There should be 4 Plastic Push Clips.
Grab a rag and clean up all the dirt underneath.
I used Stainless Steel Hardware from Home Depot and decent Drill bits!
Test fit the Ballasts, Mark with Permanent Marker, Drill the holes and mount as low as possible so the Radiator cover fits flush! MAKE SURE TO MOUNT LOW OR Radiator Cover mount go back ON!
Here u see the ballast mounted and uncovered the HID Bulb!
Both Ballasts mounted with supplied Brackets.
Not a bad spot!! looks pretty Clean huh??
Here you can see the difference between the 8000k HID and the Stock Sylvania on the right.
Put the Radiator Cover back on and your pretty much done.
Take your time and hide the wires. When u pop my hood you cant even tell I have HID's. The reason I picked those spots for the Ballasts is because there wasn't much room anywhere else. Most people mount them directly behind the headlight but I didnt want the clutter. The Radiator cover covers most of the Ballast so water will not get into the electrical connectors. This install took me 3 hours!! If you dont care for a clean install just through everything next to the headlight and you will be done in literally 30 minutes!
Before!!
Before!!
After!!
After!!
:beer:
Hey guys. These are HID's from www.Freewaysport.com in C.A. (323)900-0486
They are Waterproof and Hard Rain or snow wont make them short out!
Replacement parts are also available just in case!
I paid $114.95 shipped. The Customer Service is great too!!
They are 8000k-Plug-n-Play, and they are a High/Low Beam kit. The High Beam is a Halogen (not a HID) for flashing other vehicles only. HID's take 10 seconds to warm up so flashing other cars wouldnt work to well with dual HID's. The Low Beam is bright enough for just about anybody!
Here are the goods!
Video Coming Soon!!
Notice I cleaned the wires up a little bit.
Pop off the radiator cover! There should be 4 Plastic Push Clips.
Grab a rag and clean up all the dirt underneath.
I used Stainless Steel Hardware from Home Depot and decent Drill bits!
Test fit the Ballasts, Mark with Permanent Marker, Drill the holes and mount as low as possible so the Radiator cover fits flush! MAKE SURE TO MOUNT LOW OR Radiator Cover mount go back ON!
Here u see the ballast mounted and uncovered the HID Bulb!
Both Ballasts mounted with supplied Brackets.
Not a bad spot!! looks pretty Clean huh??
Here you can see the difference between the 8000k HID and the Stock Sylvania on the right.
Put the Radiator Cover back on and your pretty much done.
Take your time and hide the wires. When u pop my hood you cant even tell I have HID's. The reason I picked those spots for the Ballasts is because there wasn't much room anywhere else. Most people mount them directly behind the headlight but I didnt want the clutter. The Radiator cover covers most of the Ballast so water will not get into the electrical connectors. This install took me 3 hours!! If you dont care for a clean install just through everything next to the headlight and you will be done in literally 30 minutes!
Before!!
Before!!
After!!
After!!
:beer:
Last edited: