Kenne bell 2.8 Mammoth
96-04 PI head KB 2.8L LC with AN lines, mammoth with big mouth CAI and TB, fuel rails, 60lb injectors, AFCO dual pass front mount w/ dual fans, EMP WP-29 water pump, relays, 7 gallon trunk mount tank, all AN lines, multiple pullies $6500
Innovators west standard size 8 rib blower lower $250
American Racing Long Tube headers 1 3/4" headers and Off road X pipe. $700
Motor
4.6 2v/4v stroked to 5.0
Terminator block
3.750 stroke 4340 steel crank
Manley H Beam Rods With ARP 2000 Bolts
Probe 14118 pistons 9.2 to 1 compression
Balanced and blueprinted with build sheet $3700
Livernois CNC Ported Stage 3 4.6L 2-Valve P.I. Cylinder heads
-5 axis CNC machined
-Fully assembled w/o camshafts
-Intake flow rate 225 CFM
-Exhaust flow rate 205 CFM
-Custom valve job
-Custom ground stainless 1mm oversize (45.5mm) intake valves
-Custom ground stainless 1mm oversize (37mm) exhaust valves
-Bronze guides
-Ford valve seals, retainers, and locks
-Livernois exclusive single coil valve springs good to ~ .600 Lift
$1500
Comp cam custom grind cams stage 3
-Duration: 273/277 advertised duration
-Duration @ .050": 236/240
-Lift: .495/.495
-110° lobe separation angle
-2000-6000 RPM operating range
$500
96-04 PI head KB 2.8L LC with AN lines, mammoth with big mouth CAI and TB, fuel rails, 60lb injectors, AFCO dual pass front mount w/ dual fans, EMP WP-29 water pump, relays, 7 gallon trunk mount tank, all AN lines, multiple pullies $6500
Innovators west standard size 8 rib blower lower $250
American Racing Long Tube headers 1 3/4" headers and Off road X pipe. $700
Motor
4.6 2v/4v stroked to 5.0
Terminator block
3.750 stroke 4340 steel crank
Manley H Beam Rods With ARP 2000 Bolts
Probe 14118 pistons 9.2 to 1 compression
Balanced and blueprinted with build sheet $3700
Livernois CNC Ported Stage 3 4.6L 2-Valve P.I. Cylinder heads
-5 axis CNC machined
-Fully assembled w/o camshafts
-Intake flow rate 225 CFM
-Exhaust flow rate 205 CFM
-Custom valve job
-Custom ground stainless 1mm oversize (45.5mm) intake valves
-Custom ground stainless 1mm oversize (37mm) exhaust valves
-Bronze guides
-Ford valve seals, retainers, and locks
-Livernois exclusive single coil valve springs good to ~ .600 Lift
$1500
Comp cam custom grind cams stage 3
-Duration: 273/277 advertised duration
-Duration @ .050": 236/240
-Lift: .495/.495
-110° lobe separation angle
-2000-6000 RPM operating range
$500