4.6 2v/4v shortblock, heads, cams, SC

[lxlawWFO]

Kenne bell 2.8 Mammoth


96-04 PI head KB 2.8L LC with AN lines, mammoth with big mouth CAI and TB, fuel rails, 60lb injectors, AFCO dual pass front mount w/ dual fans, EMP WP-29 water pump, relays, 7 gallon trunk mount tank, all AN lines, multiple pullies $6500


Innovators west standard size 8 rib blower lower $250


American Racing Long Tube headers 1 3/4" headers and Off road X pipe. $700


Motor


4.6 2v/4v stroked to 5.0

Terminator block

3.750 stroke 4340 steel crank

Manley H Beam Rods With ARP 2000 Bolts

Probe 14118 pistons 9.2 to 1 compression



Balanced and blueprinted with build sheet $3700



Livernois CNC Ported Stage 3 4.6L 2-Valve P.I. Cylinder heads


-5 axis CNC machined

-Fully assembled w/o camshafts

-Intake flow rate 225 CFM

-Exhaust flow rate 205 CFM

-Custom valve job

-Custom ground stainless 1mm oversize (45.5mm) intake valves

-Custom ground stainless 1mm oversize (37mm) exhaust valves

-Bronze guides

-Ford valve seals, retainers, and locks

-Livernois exclusive single coil valve springs good to ~ .600 Lift


$1500


Comp cam custom grind cams stage 3

-Duration: 273/277 advertised duration
-Duration @ .050": 236/240
-Lift: .495/.495
-110° lobe separation angle
-2000-6000 RPM operating range

$500

 

[lxlawWFO]

Went with coyote swap, all parts have around ~200-250 miles.

 

[lxlawWFO]

In texas

 

[Michael Plackis]

Are the headers for a 2v or 4v?


Sent from my iPhone using svtperformance.com

 

[lxlawWFO]

They are off this motor. A 2v.

 

[Michael Plackis]

Ah okay. Well thank you


Sent from my iPhone using svtperformance.com

 

[DSGGT2003]

Is the motor and heads still available?

 

[lxlawWFO]

Heads and cams only thing left

 

[DSGGT2003]

Heads and cams only thing left

I am interested in your heads shoot me a text or call when you can. Jeff:224-829-9175