4.10 gears for my 2003 Terminator Cobra

[86caprirs]

Is the stock gears 3:55 in the cars? I may swap housings with someone then.

 

[86caprirs]

I found in the search that the iron housing is from a supercoupe thunderbird. Adds 45 pounds but is stronger than the Cobra one.

 

[TVSCobra]

Not 45 pounds, the weight difference is about 20 lbs.

 

[Bruha]

I am thinking the 3.27's would be great street gears. I might add that to my to do list.

 

[Parts-is-Parts]

I have an Auto with 4:10's and cant wait to put a 3:55 back in.

 

[TVSCobra]

I have an Auto with 4:10's and cant wait to put a 3:55 back in.

I wish I still had all my old parts. I sold all them off.

 

[mach1033]

had 410s. It got old. I have 3.27s now with an iron IRS housing and love them. Plan on POSI or a whipple. Plus Im averaging 23-25mpg with the 327s. With 410s I was down to 16 mpg average at one point. Unless this is an all out drag car I wouldn't go more than 373s. Really depends on mods and what you plan to do with the car.

I plan on going with this gear once my motor is done. Was there a real difference when you went WOT compared to the 410's? I'm going to be in the 700rwhp range and I think my 373's will blow my drag radials off.

 

[86caprirs]

I hate the 4.10's. I will swap you center sections.

 

[stal94gt]

i was just going to post this same question. i dont really drive my car on the street and when i do i dont mess around. i want to go to a 28x11 inch tire for the track but as of right now i run 26x10's which hook ok with 3.55's. i also have a sra in the back with a pretty decent suspention. i dont really spin that much with drag radials on the back with low 600 hp.