315's on a fox body

93_408_LX

New Member
Established Member
Joined
Sep 20, 2008
Messages
1,023
Location
Coquitlam, BC
Pony R 5 lugs 17x10" sized for SN95 axles w. cobra discs in a fox. Surprisingly they make a wheel for that exact setup which is what I had. I bashed in the inner fender with a BFH a bit, and the outer obviously has to be rolled.
100_1700.jpg

100_1369.jpg
Your car looks mint! Did you get the car back together yet with the new shortblock I set you up with?
 

fiveohpoepoe

Active Member
Established Member
Joined
Apr 19, 2005
Messages
2,706
Location
Winston Salem,NC
I want to see a black hatch lx lowered on some black centered CCW classics....yeah.......that would be nice.

There was a pic floating around with chrome CCW,s... I cant find it to save my life. It was under "Lets see those sexy fox bodies" or something along those lines. 100% bad ass
 

DRTHV8R

I am your father.
Established Member
Joined
Oct 22, 2005
Messages
4,184
Location
California
Pony R 5 lugs 17x10" sized for SN95 axles w. cobra discs in a fox. Surprisingly they make a wheel for that exact setup which is what I had. I bashed in the inner fender with a BFH a bit, and the outer obviously has to be rolled.
100_1700.jpg

100_1369.jpg

Damn! :eek:
 

ChrisRed89LX

Member
Established Member
Joined
Mar 15, 2009
Messages
140
Location
Victoria BC
Your car looks mint! Did you get the car back together yet with the new shortblock I set you up with?

Yup. It is currently doing just fine. Had a bit of an incident on the dyno where a defective boost controller over boosted and blew the fiber felpro head gasket, but the motor wasn't harmed. It is back together now, with MLS gaskets and a better boost controller.
 
Last edited:

lazerred

New Member
Established Member
Joined
Jul 21, 2002
Messages
244
Location
TEXAS
well i dont have 315's best i can do is 305/35/18 555r
but sat to high in the rear so i lowered and put some 275/35/18 bfg

gonna try the new nt05 r when they come out

92coupe032.jpg


with 275/35/18



CIMG5185.jpg


CIMG5193.jpg


with 305/35/18
 

Epikmach

New Member
Established Member
Joined
May 15, 2007
Messages
972
Location
LEFT COAST
any one have a picture of how much they beat on the inners?

My car doesn't have 315's on it, but this is a pic of what I did to clearance my inner fenders to fit 10" wheels. I basically took a small sledge hammer & folded the sharp inner edge up so it wouldn't cut into the tire on hard bumps. Its not pretty, but you will never see it, plus it can be hidden with a coat of rubberized undercoating....

CIMG0305.jpg
 

f2hatch

Well-Known Member
Established Member
Joined
Aug 11, 2007
Messages
3,485
Location
CT
315 M/T's on my drag radial project. Now it has a funny car cage.
DSC01139.jpg

DSC01141.jpg

DSC01136.jpg
 

Users who are viewing this thread



Top