could a 315/35/17dr nitto be used on a standard 17x9 rim?
315/35/17
- Thread starter blue04venom
- Start date
- Status
No.
Per Nitto's site, you need a minimum of a 10.5 inch wheel for the tire to be 100% safe.
Per Nitto's site, you need a minimum of a 10.5 inch wheel for the tire to be 100% safe.
Yes....the nitto's run thinner compared to a regular 315....do a search and see how many threads come up....
96, please read the post above you.
You CAN do it, but, it is NOT SAFE.
You CAN do it, but, it is NOT SAFE.
Chris please read the post above.....Nitto's run thinner than a regular 315. I'm sure you know this.....a BFG 315, yes definetly use a 10.5 rim. But Nitto's 315 is about the size of a BFG 295...it is plenty safe. Do a search and see how many dozens if not more run the Nitto's on the stock 17X9 wheels....
Here's a pic of how the Nitto's look on the stock wheels....
Here's a pic of how the Nitto's look on the stock wheels....
Last edited:
Of course I know that a Nitto runs a little narrow.
I'd say the engineers at Nitto would know their stuff a little better than you and I when recommending wheel sizes when it comes to safety.
BTW, a 295 BFG needs a 10 inch wheel. :beer:
I'd say the engineers at Nitto would know their stuff a little better than you and I when recommending wheel sizes when it comes to safety.
BTW, a 295 BFG needs a 10 inch wheel. :beer:
u will be fine
It'll wear out in the middle and the edges will still look brand new. Had a set on my car, what a waste of $. Buys some 10.5's
- Status
Users who are viewing this thread
