2007 GT500, Evolution Stage 6, 9500 miles

ryan319

Member
Established Member
Joined
Nov 19, 2010
Messages
358
Location
Irwin, PA
20160925_164444_zpscc6lliox.jpg


20160925_164452_zpspc9xhelc.jpg


20160925_193856_zps788hamyz.jpg


20160925_164502_zpsv2gntbvu.jpg


20160925_164529_zpsf1wlmrix.jpg


2007 GT500 black with tungsten grey strips. 9500 miles. Evolution Performance Stage 6, #001. Evo built the car for John Lund. Lund tuned with SCT at Wolfepack Speed in Pittsburgh. Made 730rwhp. It runs absolutely awesome. Asking $31,000 but open to offers maybe trades??? Title in hand for easy transaction.

Kenne Bell 2.8 with upgrade snout. 3.25" upper with Innovative West 10% overdriver balancer nets around 18lb 3.5" upper Aluminum will lower boost 2lb. I have a few extra pulleys for it, larger and smaller.

72lb Injectors, Boost-A-Pump wired continuous , High Flow fuel Rails with -8an crossover
Ford Racing 123mm CAI with Calibrated Twin Bore 75mm KB Throttle

C&R 4 Core Road Race Radiator, 170 Stat
C&R Heat Exchanger with 8" Spal Fans. Fans Wired to the switch left of knee under dash.
C&R high Capacity HE Resivour and Coolant Tank

Kooks 1 3/4" long tubes into 3" collector and full 3" custom stainless X-pipe, no cats into 3" polished Magnafllow , 4" Bassini custom tips.

Aluminum Dynotech Driveshaft with Safety Loop
Spec ST (Super Twin) Clutch
Steeda TriAx Shifter with Steeda Reinforced Trans Mount and Tensioner

Steeda Super Sport Lowering springs, QA1 adjustable Rears, with CHE adjustable Lower and Upper Control Arms. Subframe reinforce mounts for rear control arms, adjustable panhard bar. Upper Control Arm HD Mount

4.10 Ford Racing Gears with solid pinion bushing, Eaton Torsion Posi, Ford Racing Diff Cover with stud mounts.

Forgestar wheels, 18x10.5 and 18x9. 305 Nitto’s on the back and stock size (265 I think?) Goodyears on the front. Tires have ~2000 miles.
Extra set of wheels with 2 Weldcraft widened to 18x11 with 345 M/T drag radials. Also have a set of front rims stock size.

Interior is stock except for a boost gauge in the vent. Just ordered a speedawg shifter knob with momentary switch for line lock.

Negatives - the hood was notched to fit the blower, can only see it with the hood open. I can provide pics to interested buyers.

Needs nothing. Runs awesome, like stock until you lay into it. Fluids are all recent, including the blower oil.
 
Last edited:

ryan319

Member
Established Member
Joined
Nov 19, 2010
Messages
358
Location
Irwin, PA
TTT

Factory CD player is in the process of being repaired and should be fixed in the next couple of days.

Open to reasonable offers before I try Ebay. The car I'm targeting, an auto swapped terminator, is still for sale so I am looking to move this beast.
 

weider1717

Member
Established Member
Joined
Jan 18, 2014
Messages
532
Location
sc
Ryan, consider the widens 18x11 and 18x9.5 sold. My email is: [email protected] and my number is (864) 784-4415. I can get this arranged by paypal. This site isn't letting me PM it gives me an error message every time. See your wheel for sale thread.
 

03cobratwin67s

Member
Established Member
Joined
Dec 2, 2016
Messages
88
Location
Shelby Twp, Mi
Got a white 2013 6.7 diesel 139 k miles 69 mm turbo built Trans over 40 k into it asking 29,850 if interested in possible trade 586-383-8308 for more pics or info
 

ryan319

Member
Established Member
Joined
Nov 19, 2010
Messages
358
Location
Irwin, PA
bump - open to offers for a quick sell. Just had a local car come up for sale that I want to make a move on but I only have room for one toy.
 

Users who are viewing this thread



Top