2005 Forester XT. Silver on black heated leather. Factory 5spd car.
I purchased the car last year with the plan to finish the build properly. I did so and have been enjoying the car! Unfortunately the time has come to move on and use the money for a house. (Growing up sucks!)
Located in North Attleboro, Ma.
Asking $22k obo.
Open to trades/trades+cash.
Body has 103,xxx
Motor has less than 9000 miles
6spd ~50K
Brembo’s, R180, and axles ~6000
Turbo build has ~2500
Engine Build:
EJ257 701 casting
Manley Rods w ARP bolts
Wiseco 100mm Pistons
ACL Main and Rod Bearings
ARP Case Bolts
ARP Head Studs
Brian Crower Stage 3 Street/Race Cams (280/280)
Brian Crower Ti Valvetrain
Manley 1mm OS Intake and Exhaust Valves
Timing Belt Kit (idlers, tensioner, water pump, timing belt, etc)
JDM STi 11mm Oil Pump
KillerB Oil Pump Pickup
STI oil pan
Engine Mods/Turbo:
Forced Performance Red
-10cm
-84mm anti-surge
-welded for ewg
Gimmick Motorsports front mount intercooler
-piping powdercoated candy red (super chrome, lollipop red, clear)
Intake manifold
-powdercoated metallic gray
Forced Performance 84mm turbo inlet
KStech 83mm intake and heatshield
GM iat sensor
Tial Q bov
Aeromotive 340 fuel pump
Perrin v1 fuel rails
Injector Dynamics 1000cc injectors
P&L AVCS/turbo oil line
Grimmspeed 8mm phenolic spacers
Zerolift composite TGV deletes
Hallman Pro RX boost controller
Crawford Air/Oil Separator
Tial 38mm Wastgate
Mishimoto radiator
SPT Batteriy Hold/Tie down
SPT oil cap
Group N motor mounts
Subtle Solutions Alternator Cover Black
Subtle Solutions Radiator Shroud Black
Subtle Solutions Hood Struts
Exhaust:
Agency Power uel header
-wrapped in DEI titanium
Grimmspeed v-band EWG uppipe and dump tube
Invidia catless downpipe
-wrapped in DEI titanium
APS catback
-extended for FXT fitment
Suspension:
BC Racing BR coilovers
Front strut brace
-powdercoated candy red and metallic gray
Rear strut brace
-powdercoated candy red and metallic gray
Exterior:
KSTech scoop delete vent
JDM STI fog covers
Rally Armor Skid plate
Rally Armor UR mud flaps
GarageXTI badge
Importolology Front Lip
-molded
06-07 STI limited front lip
Custom badgeless grille
Hella Supertones
-powdercoated candy red
C pillar and hatch trim wrapped in 3M gloss black
Retrofitted headlights
-Eagle Eye replacements headlights
-Morimoto mini D2S projectors with Iris shrouds
-Innovited 55w 4500k bulbs and ballasts
20% window tint
Interior:
STI gauge cluster (07)
Custom dash cubby pod
-AEM wideband
-AEM boost
-AEM oil pressure
Subtle Solutions ash tray pod
-Prosport water temp
-Prosport EGT
Trim wrapped in 3M matte black vinyl
Subtle Solutions HVAC overlay
Red hazard button
Auto dim mirror
Pioneer AVH-X5500-BHS
STI pedal set
STI ebrake handle
Redline Goods shift boot
Redline Goods ebrake boot
Subaru gray carpet mats
Subaru all weather mats
Wheels/Tires:
Enkei VR5 18x8
Fuzion UHP 225/40/18
Brakes:
STi Brembo Calipers Front and rear
-powdercoated teal
STI caliper rebuild kits front and rear
Hawk HPS front and rear pad sets
DBA 02-12 Sti Front Rotors T-Slotted
DBA Brembo Conversion Rotors rear T-Slotted
Motil RBF 600 racing brake fluid
Kartboy wrx rear 2-pot caliper adapters
-modded for Brembo use
Transmission:
05 STI 6 speed transmission
WRX starter
Group N tranny mount
Group S lightened flywheel
ACT STi street clutch
05 STi R180 rear diff
The Driveshaft Shop R180 differential Conversion 800HP rear axles
Automatic Driveshaft
Shifter linkage w/ TWM short shifter
New throwout bearing
OEM STI dccd buttons
DCCDPro.com dual mode controller
Kartboy rear diff outrigger bushings (hard black)
Kartboy rear subframe bolts
406/378 on a mustang dyno.
I will not be selling parts off it.
I'm sure that I am forgetting something!
I purchased the car last year with the plan to finish the build properly. I did so and have been enjoying the car! Unfortunately the time has come to move on and use the money for a house. (Growing up sucks!)
Located in North Attleboro, Ma.
Asking $22k obo.
Open to trades/trades+cash.
Body has 103,xxx
Motor has less than 9000 miles
6spd ~50K
Brembo’s, R180, and axles ~6000
Turbo build has ~2500
Engine Build:
EJ257 701 casting
Manley Rods w ARP bolts
Wiseco 100mm Pistons
ACL Main and Rod Bearings
ARP Case Bolts
ARP Head Studs
Brian Crower Stage 3 Street/Race Cams (280/280)
Brian Crower Ti Valvetrain
Manley 1mm OS Intake and Exhaust Valves
Timing Belt Kit (idlers, tensioner, water pump, timing belt, etc)
JDM STi 11mm Oil Pump
KillerB Oil Pump Pickup
STI oil pan
Engine Mods/Turbo:
Forced Performance Red
-10cm
-84mm anti-surge
-welded for ewg
Gimmick Motorsports front mount intercooler
-piping powdercoated candy red (super chrome, lollipop red, clear)
Intake manifold
-powdercoated metallic gray
Forced Performance 84mm turbo inlet
KStech 83mm intake and heatshield
GM iat sensor
Tial Q bov
Aeromotive 340 fuel pump
Perrin v1 fuel rails
Injector Dynamics 1000cc injectors
P&L AVCS/turbo oil line
Grimmspeed 8mm phenolic spacers
Zerolift composite TGV deletes
Hallman Pro RX boost controller
Crawford Air/Oil Separator
Tial 38mm Wastgate
Mishimoto radiator
SPT Batteriy Hold/Tie down
SPT oil cap
Group N motor mounts
Subtle Solutions Alternator Cover Black
Subtle Solutions Radiator Shroud Black
Subtle Solutions Hood Struts
Exhaust:
Agency Power uel header
-wrapped in DEI titanium
Grimmspeed v-band EWG uppipe and dump tube
Invidia catless downpipe
-wrapped in DEI titanium
APS catback
-extended for FXT fitment
Suspension:
BC Racing BR coilovers
Front strut brace
-powdercoated candy red and metallic gray
Rear strut brace
-powdercoated candy red and metallic gray
Exterior:
KSTech scoop delete vent
JDM STI fog covers
Rally Armor Skid plate
Rally Armor UR mud flaps
GarageXTI badge
Importolology Front Lip
-molded
06-07 STI limited front lip
Custom badgeless grille
Hella Supertones
-powdercoated candy red
C pillar and hatch trim wrapped in 3M gloss black
Retrofitted headlights
-Eagle Eye replacements headlights
-Morimoto mini D2S projectors with Iris shrouds
-Innovited 55w 4500k bulbs and ballasts
20% window tint
Interior:
STI gauge cluster (07)
Custom dash cubby pod
-AEM wideband
-AEM boost
-AEM oil pressure
Subtle Solutions ash tray pod
-Prosport water temp
-Prosport EGT
Trim wrapped in 3M matte black vinyl
Subtle Solutions HVAC overlay
Red hazard button
Auto dim mirror
Pioneer AVH-X5500-BHS
STI pedal set
STI ebrake handle
Redline Goods shift boot
Redline Goods ebrake boot
Subaru gray carpet mats
Subaru all weather mats
Wheels/Tires:
Enkei VR5 18x8
Fuzion UHP 225/40/18
Brakes:
STi Brembo Calipers Front and rear
-powdercoated teal
STI caliper rebuild kits front and rear
Hawk HPS front and rear pad sets
DBA 02-12 Sti Front Rotors T-Slotted
DBA Brembo Conversion Rotors rear T-Slotted
Motil RBF 600 racing brake fluid
Kartboy wrx rear 2-pot caliper adapters
-modded for Brembo use
Transmission:
05 STI 6 speed transmission
WRX starter
Group N tranny mount
Group S lightened flywheel
ACT STi street clutch
05 STi R180 rear diff
The Driveshaft Shop R180 differential Conversion 800HP rear axles
Automatic Driveshaft
Shifter linkage w/ TWM short shifter
New throwout bearing
OEM STI dccd buttons
DCCDPro.com dual mode controller
Kartboy rear diff outrigger bushings (hard black)
Kartboy rear subframe bolts
406/378 on a mustang dyno.
I will not be selling parts off it.
I'm sure that I am forgetting something!
