2003 Mineral Grey 2.9 Whipple Crusher Cobra - Updated with Pictures
It's come time to part ways with my better half, my 2003 Mineral Grey Cobra. Roughly 54k miles. I'd rate interior as 8/10 and exterior roughly 8/10. A brand new OEM Ford Bumper, also painted by Ford installed March 2015. With new chin spoiler as well. The only reason for selling is i have recently fell in love with C6ZO6's and I'm looking to propose to my girlfriend. I have no use for two sports cars. If you are looking to modify a cobra, this is a great way to save a ton on the build. A quick calculation of what I've invested so far comes to well over $20k. ( Thats just calculating the main/larger items AND not including all the tuning cost). All parts installed in May of 2012 unless noted below. Tuned by Justin's Performance Center (JPC). I know I am forgetting many things. Feel free to ask!
$26,000 - Located in Maryland
Two4Zero-372-4709 call/text
[email protected]
-E-mail or text works best. Work is very busy and please so not be offended if I cannot respond immediately.
Induction
-2.9L Whipple Supercharger w/ Crusher new as of May 2013 due to warrenty replacment
-3.5 and 3.25 pulley
-2012 GT-500 MAF meter
-Lethal Perfornance MAF Adapter Harness
Engine
-Comp Cams 106500 Cams
-Comp Cams 4.6L DOHC Titanium Retainers
-Comp Cams 4.6L 4V Performance Beehive Valve Springs
-Energy Suspension Poly Motor Mounts
-ARP 2000 series head studs
-DivisionX 4 Pulley Idler Kit
-SLP Longtube Headers and X-pipe
-SLP LM1 cat-back ( Magnaflow Bullet style mufflers installed 3/2015 replacing only LM1 mufflers)
-NGK TR6 spark plugs
-Valve covers and almost all accessories brackets in crinkle black
-Mechman Billet Alternator (constant and reliable Voltage feed for fuel pumps, etc)
--- NEW ALTERNATOR AS OF 2/2015. Updated replacement from Mechman due to pulley failure ---
-Brand new battery from Ford (2013)
-Every sensor was replaced during build. All replacment factory parts and sensors are Ford OEM
-Royal Purple used for every oil change
Fuel
-Lethal Performance/Division X 03-04 Cobra 1400+rwhp Return Style Fuel System ( Kit includes -10 feed, -8 return, regulator, fuel hat, fuel rails, 2-Walbro 465lph pumps, etc etc. (new pumps as of April 2014)
-Injector dynamics ID 1000 injectors
Cooling
-Lethal Performance GEN 2 Head Cooling Mod
-Afco Pro Series Heat Exchanger
-Reische Performance 170 Degree High Performance Thermostat
Drivetrain/Suspension
-T-56 Magnum
-Quicktime SFI bellhousing
-Mcleod RXT Street Twin Disc Clutch
-Mcleod Aluminum Flywheel
-McLeod Throw Out Bearing
-Ford Racing 96-04 Mustang Roller Pilot Bearing
-Custom 4inch driveshaft from DSS with 1350 transmisson yoke
(All transmisson related parts have less than 2000 miles since install)
-UPR Chromoly Pro-Series K-Member Kit w/ coilovers
-UPR 96-04 Mustang Extreme Series Bumpsteer Kit
-Maxim Motor Sports Full Length Subframe connectors
-Drive shaft safety loop
-Solid rear from 2003 Mach 1: welded axle tubes, strang 31 spline axles, spool,c-clip eliminators,all new Ford racing bearings, 1350 pinion yoke, Ford Racing 3:73 gears, I dont remember who makes the diff cover, looks similar to Ford Racing. (also less than 2000 miles since built)
New as of March 2015:
- Strange 10 way adjustable struts
- Strange coil overs
- UPR 12-250 coil over springs
- Offset poly steering rack bushings
- All new UPR A-Arm bushings ( grease zerks also installed )
- Team Z Street Beast - double adjustable upper and lower control arms ( rear )
- Torque Box reinforcements - upper and lower ( Bolted and welded )
( Note: Torque boxes were not damaged. Were simply installed as preventative )
- Poly differential housing bushings
-Stock Mach 1 springs
- Viking Double Adjustable rear shocks w/ poly mounts
Wheels/Tires
-Front: 275/40/17 Mickey Thompson Street Comps
-Rears: 1 set of 28x10x17 Hoosier Slicks, 1 set of 295/45/17 (28” tall) Mickey Thompson ET street II's on 10.5” Cobra replicas
(Also installed: GT rear brake coversion to fit 15 inch wheels)
Interior
-6 point bolt in, paint matched roll cage with removable door bars and center bar (the bar behind seats, removal allows access to rear sears without playing limbo)
-5 .0 Resto Rear seat delete (rear sears come with)
-Line lock installed on Rocker switch
-Steering column gauge mount with Wideband Gauge installed
-Hilton boost overlay
Tuning
-SCT Liviwire tuned by JPC
-Tuned on:
93 octane/3.5 pulley-650 HP
e85/3.25 Pulley-827HP.
I have no torque readings at the moment, the dyno wouldnt read torque for some reason that day.
I have been assured many times over that the bottom end is safe at the e85 power level. Its all about the tuning. And we have 34 hours of logged tuning just on the last round of tuning. I drive this car everywhere when I am not at work. The spool gives no issue driving, only noticed during sharp turns. I have paperwork on most the parts installed. The car has only been to the track three times (two MACA rentals and one JPC rental), with a grand total of maybe 12 passes.
Please see last post for updated parts and pictures.
It's come time to part ways with my better half, my 2003 Mineral Grey Cobra. Roughly 54k miles. I'd rate interior as 8/10 and exterior roughly 8/10. A brand new OEM Ford Bumper, also painted by Ford installed March 2015. With new chin spoiler as well. The only reason for selling is i have recently fell in love with C6ZO6's and I'm looking to propose to my girlfriend. I have no use for two sports cars. If you are looking to modify a cobra, this is a great way to save a ton on the build. A quick calculation of what I've invested so far comes to well over $20k. ( Thats just calculating the main/larger items AND not including all the tuning cost). All parts installed in May of 2012 unless noted below. Tuned by Justin's Performance Center (JPC). I know I am forgetting many things. Feel free to ask!
$26,000 - Located in Maryland
Two4Zero-372-4709 call/text
[email protected]
-E-mail or text works best. Work is very busy and please so not be offended if I cannot respond immediately.
Induction
-2.9L Whipple Supercharger w/ Crusher new as of May 2013 due to warrenty replacment
-3.5 and 3.25 pulley
-2012 GT-500 MAF meter
-Lethal Perfornance MAF Adapter Harness
Engine
-Comp Cams 106500 Cams
-Comp Cams 4.6L DOHC Titanium Retainers
-Comp Cams 4.6L 4V Performance Beehive Valve Springs
-Energy Suspension Poly Motor Mounts
-ARP 2000 series head studs
-DivisionX 4 Pulley Idler Kit
-SLP Longtube Headers and X-pipe
-SLP LM1 cat-back ( Magnaflow Bullet style mufflers installed 3/2015 replacing only LM1 mufflers)
-NGK TR6 spark plugs
-Valve covers and almost all accessories brackets in crinkle black
-Mechman Billet Alternator (constant and reliable Voltage feed for fuel pumps, etc)
--- NEW ALTERNATOR AS OF 2/2015. Updated replacement from Mechman due to pulley failure ---
-Brand new battery from Ford (2013)
-Every sensor was replaced during build. All replacment factory parts and sensors are Ford OEM
-Royal Purple used for every oil change
Fuel
-Lethal Performance/Division X 03-04 Cobra 1400+rwhp Return Style Fuel System ( Kit includes -10 feed, -8 return, regulator, fuel hat, fuel rails, 2-Walbro 465lph pumps, etc etc. (new pumps as of April 2014)
-Injector dynamics ID 1000 injectors
Cooling
-Lethal Performance GEN 2 Head Cooling Mod
-Afco Pro Series Heat Exchanger
-Reische Performance 170 Degree High Performance Thermostat
Drivetrain/Suspension
-T-56 Magnum
-Quicktime SFI bellhousing
-Mcleod RXT Street Twin Disc Clutch
-Mcleod Aluminum Flywheel
-McLeod Throw Out Bearing
-Ford Racing 96-04 Mustang Roller Pilot Bearing
-Custom 4inch driveshaft from DSS with 1350 transmisson yoke
(All transmisson related parts have less than 2000 miles since install)
-UPR Chromoly Pro-Series K-Member Kit w/ coilovers
-UPR 96-04 Mustang Extreme Series Bumpsteer Kit
-Maxim Motor Sports Full Length Subframe connectors
-Drive shaft safety loop
-Solid rear from 2003 Mach 1: welded axle tubes, strang 31 spline axles, spool,c-clip eliminators,all new Ford racing bearings, 1350 pinion yoke, Ford Racing 3:73 gears, I dont remember who makes the diff cover, looks similar to Ford Racing. (also less than 2000 miles since built)
New as of March 2015:
- Strange 10 way adjustable struts
- Strange coil overs
- UPR 12-250 coil over springs
- Offset poly steering rack bushings
- All new UPR A-Arm bushings ( grease zerks also installed )
- Team Z Street Beast - double adjustable upper and lower control arms ( rear )
- Torque Box reinforcements - upper and lower ( Bolted and welded )
( Note: Torque boxes were not damaged. Were simply installed as preventative )
- Poly differential housing bushings
-Stock Mach 1 springs
- Viking Double Adjustable rear shocks w/ poly mounts
Wheels/Tires
-Front: 275/40/17 Mickey Thompson Street Comps
-Rears: 1 set of 28x10x17 Hoosier Slicks, 1 set of 295/45/17 (28” tall) Mickey Thompson ET street II's on 10.5” Cobra replicas
(Also installed: GT rear brake coversion to fit 15 inch wheels)
Interior
-6 point bolt in, paint matched roll cage with removable door bars and center bar (the bar behind seats, removal allows access to rear sears without playing limbo)
-5 .0 Resto Rear seat delete (rear sears come with)
-Line lock installed on Rocker switch
-Steering column gauge mount with Wideband Gauge installed
-Hilton boost overlay
Tuning
-SCT Liviwire tuned by JPC
-Tuned on:
93 octane/3.5 pulley-650 HP
e85/3.25 Pulley-827HP.
I have no torque readings at the moment, the dyno wouldnt read torque for some reason that day.
I have been assured many times over that the bottom end is safe at the e85 power level. Its all about the tuning. And we have 34 hours of logged tuning just on the last round of tuning. I drive this car everywhere when I am not at work. The spool gives no issue driving, only noticed during sharp turns. I have paperwork on most the parts installed. The car has only been to the track three times (two MACA rentals and one JPC rental), with a grand total of maybe 12 passes.
Please see last post for updated parts and pictures.
Last edited: