hello,
We have a nice competition orange 2003 mustang cobra for sale. This car is highly modified so please understand that it is not a garage queen or show winner but with very little effort can be. The car is in very good condition but has a few rock chips and minor scratches. It is a very rare and desirable color on a 2003 SVT Cobra. We recommend that the new owner re-freshens the motor as we recently put a new engine bearing in and believe this will not be a permanent fix. Please see a list of modifications below and contact Blow By Racing at 561-417-5555 for further detail or come to the shop to view the car. asking $24,000 "as is" obo or we can work out a deal to re-freshen the motor for additional funds. The car has low miles (21,461)
I AM A FRIEND OF THE SHOP/OWNER TRYING TO HELP POST THIS FOR THEM. ALL COMMUNICATIONS MUST BE DIRECTED TO THE SHOP DIRECTLY AT 561-417-5555. MOST OF THE CREW WILL BE IN MARYLAND FOR A RACE ON THURSDAY 5/1/2014-THE FOLLOWING WEEK SO WE WOULD LIKE TO SELL THE CAR PRIOR TO 5/1/2014 OR AFTER WE GET BACK. CLEAN AND CLEAR TITLE IN HAND.
***YES WE KNOW THE VALVE COVERS NEED TO BE RE-PAINTED***
MMR Built Short Block -- 1000 HP
*(Kellogg Crank , Manley 300m -- Billet Rods / Manley Pistons / Cleveite Bearings)(rods bearing need fixing -- will fix for a price)
*CNC Port Heads
*Crower Cams
*60lb Injectors
*Full Return Style Fuel System w/ A1000 -
*10 gallon Fuel Cell
*Kenne Bell 2.8H Mammoth dual 75mm TB SC w/ 3.5 Pulley
*Metco Crank Pulley Kit
*Reichard Racing Billet Tensioner
* Reichard Racing Idler pulley
*SCT X3 Tuner
*Dyno'd @ 615 rwhp on only 14 psi ( safe tune )
*Bear 14" 6 piston Front Bears
*Bear 13" 6 piston Rear Brake
*Proportioning valve for adjustment
*Long Tube Header w/ O/R X-pipe
*Magnaflow Cat-Back
*Road Race Roll Bar with camera Mount
*DFX Clutch
*Steeda road race springs
*Steeda 4-bolt Caster Camber Plates
*Steeda Front & Rear Sway Bars ( road Race)
*AJE Tubular K-member
*AJE Tubular A-arms
*MMR Rear Seat Delete
*Steeda Tri-Ax Shifter
*Steeda Stop the Hop Kit w/ IRS Brace
*Corbeau Racing Seats
*CCW 1-pcs billet Custom Wheels (Nitto road race tires -- need new ones)
*Aluminum Radiator
*Fluidyne Dual Pass Heat Exchanger
*Autometer Gauges ( Level / Boost / Fuel Pressure)
*And I am Sure I am missing some mods. . .. . ..
We have a nice competition orange 2003 mustang cobra for sale. This car is highly modified so please understand that it is not a garage queen or show winner but with very little effort can be. The car is in very good condition but has a few rock chips and minor scratches. It is a very rare and desirable color on a 2003 SVT Cobra. We recommend that the new owner re-freshens the motor as we recently put a new engine bearing in and believe this will not be a permanent fix. Please see a list of modifications below and contact Blow By Racing at 561-417-5555 for further detail or come to the shop to view the car. asking $24,000 "as is" obo or we can work out a deal to re-freshen the motor for additional funds. The car has low miles (21,461)
I AM A FRIEND OF THE SHOP/OWNER TRYING TO HELP POST THIS FOR THEM. ALL COMMUNICATIONS MUST BE DIRECTED TO THE SHOP DIRECTLY AT 561-417-5555. MOST OF THE CREW WILL BE IN MARYLAND FOR A RACE ON THURSDAY 5/1/2014-THE FOLLOWING WEEK SO WE WOULD LIKE TO SELL THE CAR PRIOR TO 5/1/2014 OR AFTER WE GET BACK. CLEAN AND CLEAR TITLE IN HAND.
***YES WE KNOW THE VALVE COVERS NEED TO BE RE-PAINTED***
MMR Built Short Block -- 1000 HP
*(Kellogg Crank , Manley 300m -- Billet Rods / Manley Pistons / Cleveite Bearings)(rods bearing need fixing -- will fix for a price)
*CNC Port Heads
*Crower Cams
*60lb Injectors
*Full Return Style Fuel System w/ A1000 -
*10 gallon Fuel Cell
*Kenne Bell 2.8H Mammoth dual 75mm TB SC w/ 3.5 Pulley
*Metco Crank Pulley Kit
*Reichard Racing Billet Tensioner
* Reichard Racing Idler pulley
*SCT X3 Tuner
*Dyno'd @ 615 rwhp on only 14 psi ( safe tune )
*Bear 14" 6 piston Front Bears
*Bear 13" 6 piston Rear Brake
*Proportioning valve for adjustment
*Long Tube Header w/ O/R X-pipe
*Magnaflow Cat-Back
*Road Race Roll Bar with camera Mount
*DFX Clutch
*Steeda road race springs
*Steeda 4-bolt Caster Camber Plates
*Steeda Front & Rear Sway Bars ( road Race)
*AJE Tubular K-member
*AJE Tubular A-arms
*MMR Rear Seat Delete
*Steeda Tri-Ax Shifter
*Steeda Stop the Hop Kit w/ IRS Brace
*Corbeau Racing Seats
*CCW 1-pcs billet Custom Wheels (Nitto road race tires -- need new ones)
*Aluminum Radiator
*Fluidyne Dual Pass Heat Exchanger
*Autometer Gauges ( Level / Boost / Fuel Pressure)
*And I am Sure I am missing some mods. . .. . ..
Last edited: