Mods:
60# injectors
Accufab SBTB
Fore hat w/ GT pumps
Dual FPDMS w/ harness
2800 MAF
Densecharger CAI
4# lower pulley
26 spline input shaft
Spec 3+ clutch
Spec aluminum flywheel
MGW silver handle shifter
Firewall adjuster/ quadrant
Clutch freeplay mod
IRS brace
Flowmaster exhaust
Bassani x
17x9/10.5 black 03 cobras. Deep dish rears w/ plasti-dipped lips
255/40 coopers with 70% tread
315 35 mickey thompson drag radials - brand new
MMFLSC
H.O. Fibertrends 4" cowl hood
Smoked headlights
Tinted tails, third brake, and sidemarker lights
AFCO dual pass
Evenflow head cooling mod
Divorce/child support forces me to sale. Car needs a blower. Formerly a twin screw until blower locked up. Sold the KB, bought a stock unported blower and that's where the build stands right now. So, an eaton will come with the car, along with a stock plenum,throttle body AND an Accufab plenum. A weekend of labor, a few gaskets and bolts, and a trip to the dyno, and the car will be ready to go.
Interior is 8 out of 10. Wear on the shifter knob and drivers seat bolster.
Exterior has usual rock chips one would expect for a 10 year old car. One ding in passenger door down low. An impression by the gas door (can't get it to show in a pic). Four holes in front bumper where I removed the license plate bracket when I bought the car.
Price is $14k
Not interested in trades
60# injectors
Accufab SBTB
Fore hat w/ GT pumps
Dual FPDMS w/ harness
2800 MAF
Densecharger CAI
4# lower pulley
26 spline input shaft
Spec 3+ clutch
Spec aluminum flywheel
MGW silver handle shifter
Firewall adjuster/ quadrant
Clutch freeplay mod
IRS brace
Flowmaster exhaust
Bassani x
17x9/10.5 black 03 cobras. Deep dish rears w/ plasti-dipped lips
255/40 coopers with 70% tread
315 35 mickey thompson drag radials - brand new
MMFLSC
H.O. Fibertrends 4" cowl hood
Smoked headlights
Tinted tails, third brake, and sidemarker lights
AFCO dual pass
Evenflow head cooling mod
Divorce/child support forces me to sale. Car needs a blower. Formerly a twin screw until blower locked up. Sold the KB, bought a stock unported blower and that's where the build stands right now. So, an eaton will come with the car, along with a stock plenum,throttle body AND an Accufab plenum. A weekend of labor, a few gaskets and bolts, and a trip to the dyno, and the car will be ready to go.
Interior is 8 out of 10. Wear on the shifter knob and drivers seat bolster.
Exterior has usual rock chips one would expect for a 10 year old car. One ding in passenger door down low. An impression by the gas door (can't get it to show in a pic). Four holes in front bumper where I removed the license plate bracket when I bought the car.
Price is $14k
Not interested in trades