49K Miles on chassis, 37k on engine and drivetrain. 5.0 Boss block with FR500 Heads, custom cams, Billet I beam rods, built 26 spline T56, 414rwhp at 7k. Very nice vehicle, sounds incredible. Always receives comments on the sound. No cats. SCT programmer included for future tuning/emissions changes. $27k.
Contact me for additional information.
Hot idle:
Chassis
Drivetrain/Brakes/Wheels
Engine 1,800hp capable / Performance
Interior
Contact me for additional information.
Hot idle:
Chassis
- IRS
- All bushings replaced with greasable Delrin (Full Tilt Boogie)
- Upgraded cradle mounts
- Upgraded urethane diff mounts
- Detroit truetrac differential, 31 spline, with 3.73 gears
- 03/04 Cobra Axles
- Maximum motorsports coil overs, Tokico struts
- MM HD crossmember
- Heim HD tierod and bumpsteer kit
- Front Suspension
- MM coil over kit Koni Struts
- MM Caster/Camber kit
- MM Kmember, A Arms/delrin bushings
- MM Adj. Tie rod ends, bump steer kit, solid rack bushings
- Chassis
- MM full length subframe connectors
- MM Strut tower brace
- Rear shock tower chassis brace (in trunk)
Drivetrain/Brakes/Wheels
- T56 6-speed transmission, built with CF clutches, Billet input shaft, 26 spline input, MGW Shifter
- Ford Billet steel SFI flywheel
- Ram clutch (650hp rated)
- MM Clutch quadrant
- 11" clutch, UPR double lock firewall adjuster
- Brembo 14" front brake, 13" rear brake conversion
- AL Dynotech driveshaft
- 18" 5 spoke wheels
- 275/35-18 Nitto NT05 Front
- 295/35-18 Nitto NT05 Rear
Engine 1,800hp capable / Performance
- Boss 5.0 Iron Race Block
- Cobra Forged Crank
- Innovators west damper
- Manley billet I beam rods
- Custom diamond skirt and top coated forged pistons
- Moroso 10qt road race oil pan
- Oil filter relocation
- FR500 cylinder heads
- Custom billet Bullet Racing cams [email protected], .475 lift
- Custom, Race (HD) secondary chains and gears
- Custom full metal/welded ported short running cobra intake - no epoxy!
- Griffin Aluminum radiator
- 39lb injectors
- Lightning 90mm MAF
- KB boost a pump
- Upgraded FIPDM
- 03/04 Cobra fuel tank and dual pumps
- Magnaflow catback
- SLP 1 3/4"long tube headers, X pipe
- SCT programmer
Interior
- Corbeau seats
- Aluminum pedals
Attachments
-
cobra.jpg466.9 KB · Views: 51
-
cobra3.jpg414.6 KB · Views: 40
-
cobra5.jpg367.7 KB · Views: 39
-
IMG_0424.jpg325 KB · Views: 35
-
IMG_0428.jpg445.1 KB · Views: 38
-
IMG_0436.jpg390.8 KB · Views: 36
-
IMG_0446.jpg363.5 KB · Views: 38
-
IMG_0448.jpg335.7 KB · Views: 38
-
IMG_0450.jpg259.3 KB · Views: 45
-
IMG_0475.jpeg316.9 KB · Views: 29
Last edited: