1994-2004 Mustang Heater Control Knobs BLUE or GREEN Illumination

[drabadue]

Set of 3 HVAC knobs with BLUE or GREEN illumination. These should fit Rangers, Explorers, Thunderbirds, Cougars, Aerostars, Mustangs, etc. The white mark will illuminate either blue or green when your lights are turned on. See the photo below for the difference between blue and green illumination.

I have a large quantity of both colors of these knobs. See photos below. I sell them as a set of three knobs. Each knob has been cleaned, inspected, and then packaged as a set.

Guaranteed free from cracks or any major blemishes. Knobs may show small signs of wear, but nothing major.

If you are interested, send me a PM and I will ship a set out to you IN THE COLOR OF YOUR CHOOSING.

$10 shipped for a set of three to the continental US.

Green on the LEFT, Blue on the RIGHT

Blue

Green

Blue in package

Green in package

Proof that I have what I say I have

 

[Deceptive]

I will be PMing you for a blue pair.


Sent from my iPhone using Tapatalk

 

[drabadue]

I will be PMing you for a blue pair.


Sent from my iPhone using Tapatalk

Sent you a PM.

 

[drabadue]

PM's Replied.

I have about 7 sets of green left, and over 20 sets of blue left. Shoot me a PM and I will get you hooked up.

 

[drabadue]

Another set of blue sold. Still have plenty left.

 

[WhiteFaleen2001]

You wouldn't happen to sell the blue inserts individually would you?

 

[drabadue]

You wouldn't happen to sell the blue inserts individually would you?

Sure. I have plenty of knobs that wind up being rejects (either broken, faded, etc), and I save all the left over inserts.

I can ship you as many of them as you would like. The white "ink" on them will be free from blemishes and you can simply push your old inserts out, and snap these in.

I also have plenty of blemished inserts with the white "ink" missing. I hope to one day have a solution for putting the white stripe back on them.

 

[drabadue]

These knobs had blemished white "ink" on the inserts, so I removed the inserts to reuse the knobs.

I have also found some "clear" inserts that you could technically light up with any color based on what LED's you had in your heater control panel. I hope to have some of those available for sale at some point.