10.5, will the stock tires work

cobrastrike4

New Member
Established Member
Joined
Jan 15, 2006
Messages
151
Location
midwest
I would like to go to 17 x10.5 for the rear with the IRS, will my original
275-40-zr17 mount on these rims with no problem and where will I find the correct spacers and deeper lug nuts?
 

racebronco2

Well-Known Member
Established Member
Joined
Sep 23, 2003
Messages
7,268
Location
palmdale, ca
i ran some on my car that i borrowed for an auto cross event. did not need spacers or different lug nuts because the tires weren't close to the irs bolts so i used the stock lugs and no spacers..
 

Top_Fuel

Person of Interest
Established Member
Joined
Aug 26, 2003
Messages
3,281
Location
~
cobrastrike4 said:
I would like to go to 17 x10.5 for the rear with the IRS, will my original 275-40-zr17 mount on these rims with no problem...
They will mount on 10.5" wheels...but they will look a little goofy. The outside edges of the wheel will stick out further than the sidewall of the tire. Don't get close to any curbs with that setup or you'll scratch up your wheels for sure! :uh oh:

Like racebronco2 said...you won't need any spacers or mods with that wheel/tire setup.
 

cobrastrike4

New Member
Established Member
Joined
Jan 15, 2006
Messages
151
Location
midwest
Ok cool, ya know I was kinda thinking the edge of the rim might do that since the tire may be just a tad less just was'nt sure thanks.
 

Users who are viewing this thread



Top