10-18 Swanson Dyno Count!

[Red BOLT99]

10-18 Swanson Dyno CANCELED!!!!

!!!!!!!!!!!!!!!!!!!!!!!!CANCELED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I need to have who ever is gonna be on the Dyno on the 18th post in.
I need to have a count by sunday, if we do not have an adiquit # We will be pulling the plug!
So please post in.
No BSing on this thread please.
Thanks fellas & Ladies.

 

[SonicVenum]

I'm going. Does his muffler guy open early enough that I can get the bung on before heading to Danny's?

 

[Red BOLT99]

He's not open on Saturday's and Sundays

 

[jonas]

I cant make it
going to buttonwillow for some sidewayz action!!

 

[Dante@DMP]

i'll be there if don's truck is ready for the dyno...

 

[SoCal-L]

Yo Iceman~~~~~~~~Great Motor~~~Thanks a Mill.
Took the 2 3/4 upper pulley off went w/the 3 1/4 upper for breakin. Stoppped by Swanson to make sure I was AOK and safe to let em rip. Used my old stock motor autologic program.......3 1/4 upper
Danny took out some timing.......1st pull 481.51hp 525.93
2nd 484.46hp 527.47
91 octane AFR 11.4
stock exhaust

I've got lots of room for more........ For a street Program
ok for now

I'll give ya a call Sat or Sun (11th ......12th)

 

[kaos]

Count me in.

 

[Venomous Mofo]

Originally posted by SoCal-L
Yo Iceman~~~~~~~~Great Motor~~~Thanks a Mill.
Took the 2 3/4 upper pulley off went w/the 3 1/4 upper for breakin. Stoppped by Swanson to make sure I was AOK and safe to let em rip. Used my old stock motor autologic program.......3 1/4 upper
Danny took out some timing.......1st pull 481.51hp 525.93
2nd 484.46hp 527.47
91 octane AFR 11.4
stock exhaust

I've got lots of room for more........ For a street Program
ok for now

I'll give ya a call Sat or Sun (11th ......12th)

Dayum, i knew you would walk away with a strong street program. Lets see the Race side #'s Don!!

 

[Dante@DMP]

that's a strong running truck don,with the 2/34 upper pulley you are going to be over the 500hp on a 91 street program,with a racing file is going to be insane.:thumbsup:

 

[2F2F]

Damn you nasty L's

. Kudos on the great numbers you guys are getting

.

 

[Red BOLT99]

ttt??

 

[kaos]

How many people do you need? I have friend with a Harley truck that might want to get dynoed.

 

[hedstrosity]

is this dyno tuned or just dyno'd ?
how much $ ?
do the dyno sheets come with air/fuel charts too?

 

[Red BOLT99]

we need 10 or more cars or trucks.

$55 for 3 pulls
if you want to be tuned , you must have a Autologic chip and you will be at the end of the list,
And if you need a A/F reading you must have a bung aready or by the date of the Dyno day.

 

[kaos]

Where can I get a bung and how much are they?

 

[Red BOLT99]

I forgot the name of the place?
Give Danny a call on MOnday 310-787-7800,
he has his own prefered bung welder dude.
its not far from the shop

 

[GIJOEBRUIN]

I'm in and so is SupraKal.

Joseph

 

[SupraKal]

BUNG huh? Don't they have a mount to put the sample tube into the tail pipe? Most dyno shops can accomidate for a car with no a/f dedicated bung....

 

[FuShnickens]

not 100% sure, but i don't think swanson's does the sniffer.

 

[2F2F]

Tailpipe sniffed measurements are variable. Accurate assessment of A/F must be datalogged pre-cat and post-manifold. MoTeC A/F metering via 02 sensors, for example.