3 videos on page 5
Some of u may have known i had been contemplating cams being installed in my 03.
On January 19th, 2004..i dropped my car off at JDM for the operation.
Forward to January 23rd, 2004..5 pulls were made w/cams.
Today, January 23rd, represents only Day 1 of tuning. The numbers below were acheived on stock pumps and stock lower pulley with a 2.75 upper pulley, still yielding the 21psi i was previously making with a 2.90 upper, and a mixture of 5 gallons of 93 octane and 3 gallons of 100 octane.
Before the cams my car made 637rwhp STD..afterwards, with no other changes other than cams, the car made 696rwhp STD, for a net gain of 60rwhp. Day 2 two will incorporate new pumps and finalizing of the tune..this current tune and dyno graph do not represent the final tune.
The graph below represents the last pull before i left JDM. The cams worked as advertised and so to did Jim D'Amore's tuning expertise.
Jim just called me afterwards..his final pull of the night yielded 707rwhp STD.
Some of u may have known i had been contemplating cams being installed in my 03.
On January 19th, 2004..i dropped my car off at JDM for the operation.
Forward to January 23rd, 2004..5 pulls were made w/cams.
Today, January 23rd, represents only Day 1 of tuning. The numbers below were acheived on stock pumps and stock lower pulley with a 2.75 upper pulley, still yielding the 21psi i was previously making with a 2.90 upper, and a mixture of 5 gallons of 93 octane and 3 gallons of 100 octane.
Before the cams my car made 637rwhp STD..afterwards, with no other changes other than cams, the car made 696rwhp STD, for a net gain of 60rwhp. Day 2 two will incorporate new pumps and finalizing of the tune..this current tune and dyno graph do not represent the final tune.
The graph below represents the last pull before i left JDM. The cams worked as advertised and so to did Jim D'Amore's tuning expertise.
Jim just called me afterwards..his final pull of the night yielded 707rwhp STD.
Last edited: