03 Cobra vs 06 Cobalt SS

Status
Not open for further replies.

cobraCMDR

I Whine
Established Member
Joined
Jan 22, 2005
Messages
913
Location
Andover, MA
Who in New York has a Cobalt SS supercharged and is stock, I'll run you at skyview drags 1/8th and murder you. there is some kid that I always see at car shows that has one. Someone took pitty on him because he is dumb and put 3k in stereo crap in it so they gave him 1st place in his category. Maybe 4 cars were in his category. Car had so many electronics running during the show he had to run the motor part of the time to keep the battery from going dead. If you are reading this I'll run your butt too. This is rediculous I could have spanked that car when I was stock on street tires and 100 degrees out. This is like comparing a stock cobra to a 10 second drag car. total BS someone close this thread it is a waste of time and totally unrealistic.
 

djt81185

Member
Established Member
Joined
Jan 23, 2004
Messages
102
Location
Where its cold
nitrovic said:
What mods do you have? I'm not doubting your story, i just find it a little suspect that the majority of people over there never lose races and are "killing" cars that run a full second faster than them stock.


on the 13.7 run it was

K&N CAI
2.6" Pulley
42.5lb injectors
Maf-t

Now
K&N CAI
2.5" Pulley
60lb injectors
HPTuners Custom Tune by me
Cat delete

I ran a 14.0@109 last time out but I broke a shifter cable...my datalogs show I'm losing .7sec on the 1-2 shift alone...and this is on my stock tires w/ 94 octane.

LOL Pain I can run with the modded mach1's...but my times were slow due to having to granny shift it...New cables were put in yesterday and got some traction bars, stock terminator svt H/E, air bags for rear springs, and wider tires on there for the next drag times next friday

Ya plenty o ricers over there...thats for sure
 

Slo3kgtVtr

Active Member
Established Member
Joined
Apr 1, 2005
Messages
1,731
Location
Vermont
cobraCMDR said:
Who in New York has a Cobalt SS supercharged and is stock, I'll run you at skyview drags 1/8th and murder you. there is some kid that I always see at car shows that has one. Someone took pitty on him because he is dumb and put 3k in stereo crap in it so they gave him 1st place in his category. Maybe 4 cars were in his category. Car had so many electronics running during the show he had to run the motor part of the time to keep the battery from going dead. If you are reading this I'll run your butt too. This is rediculous I could have spanked that car when I was stock on street tires and 100 degrees out. This is like comparing a stock cobra to a 10 second drag car. total BS someone close this thread it is a waste of time and totally unrealistic.
I'm in 100% agreement w/you....any discussion on the topic of a Cobalt SS vs. a Terminator just feeds their wet dreams. I just read the whole thread and found numerous mentionings of Cobalt SS's taking out cars that are seconds faster than them in the 1320. I think I'm going to start a new thread: my cammed LT1 vs an Enzo.
 

!!!PainTrain!!!

Mattis for POTUS
Established Member
Joined
Jun 7, 2004
Messages
3,355
Location
md
djt81185 said:
on the 13.7 run it was

K&N CAI
2.6" Pulley
42.5lb injectors
Maf-t

Now
K&N CAI
2.5" Pulley
60lb injectors
HPTuners Custom Tune by me
Cat delete

I ran a 14.0@109 last time out but I broke a shifter cable...my datalogs show I'm losing .7sec on the 1-2 shift alone...and this is on my stock tires w/ 94 octane.

LOL Pain I can run with the modded mach1's...but my times were slow due to having to granny shift it...New cables were put in yesterday and got some traction bars, stock terminator svt H/E, air bags for rear springs, and wider tires on there for the next drag times next friday

Ya plenty o ricers over there...thats for sure


Like I said, Im not saying it couldn't happen. And I just have never seen this. I guess I really have no idea of what these cars are capable of. But around here (don't mean to sound like a cocky a-hole) my mach can run with just about everything. Except the Twined GN(that thing is sick, ran a 11.02 and spun throught 200ft.) IDK I give mad props to the Cobalt. Actually thought about getting one. BTW, I would love to see your new times. (not being sarcastic)
 

Blue03Cobra

The Family Dinner Improv
Established Member
Joined
Dec 27, 2000
Messages
7,819
Location
Baton Rouge, LA
Bad06SS said:
Considering this thread isn't about Cobalts vs Cobra's, that was ricerish.
Hunh?

"03 Cobra vs 06 Cobalt SS"

However, since you now agree that the thread has gone COMPLETELY off-topic, go start a conversation thread in Road Side, Terminator Talk or smack each other around in Smack Down...this section is for kills.

I'd close this POS if the vB commands weren't locked out, at the moment...
 

djt81185

Member
Established Member
Joined
Jan 23, 2004
Messages
102
Location
Where its cold
!!!PainTrain!!! said:
Like I said, Im not saying it couldn't happen. And I just have never seen this. I guess I really have no idea of what these cars are capable of. But around here (don't mean to sound like a cocky a-hole) my mach can run with just about everything. Except the Twined GN(that thing is sick, ran a 11.02 and spun throught 200ft.) IDK I give mad props to the Cobalt. Actually thought about getting one. BTW, I would love to see your new times. (not being sarcastic)


If thigns go as planned I'll have vid as well...just hope we get nice weather that day...and I dont break anythign lol...I'm excited to be able to finally run wth everythign working again + traction mods
 

ryans01

Vacation in Iraq
Established Member
Joined
May 1, 2006
Messages
581
Location
Mountain Home, Idaho
Bad06SS said:
Lol, wow, nice comeback. I'll tell you what, let's make a deal. Either you answer the question I've been asking over and over, or I'm going to have to assume that you don't have the mental capacity to carry on this conversation, and I'll just be done posting in this thread all together. If your car truely runs 12's I'll be glad to line up if you're ever in the area, and yes from a dig. :) At this point though, you've done nothing but make yourself look dumb, and even other fellow members think your ignorant. The last thing I'd like to see is proof of what your car really runs, with all of the mods you have. After that, I choose not to "LOWER" myself to your level anymore.


ill race you i live near you too let me know we can see if you run 12's
 

Bad06SS

New Member
Established Member
Joined
Mar 4, 2006
Messages
146
Location
St. Louis
GLHS837 said:
Got his sheet? Becuase I"m flat calling bullshit on that one. 272wtq? Instant?
Held for a ways? Unless hes very highly modded, no damn way. Using your recommended site, heres a few stock dynos from the same thread.

http://cobaltss.net/forums/showthread.php?t=26220

http://i105.photobucket.com/albums/m223/brifri11/dyno2new.jpg
(doesnt break 200wtq til after 5K, never tops 200 at all)

http://img.photobucket.com/albums/v520/khronos08/dyno1s.jpg
(Same deal, doesnt crack 200 til after 5500)

Heres our pal NgalaxyTimmyos stock dyno

http://i9.photobucket.com/albums/a79/NGalaxyTimmyo/Dynostock1.jpg

http://cobaltss.net/forums/showthread.php?t=26220

Now remember, stock SRT-4s break 200ftlbs wtq before 3K, and hold it til after 5K, or 6K in most cases, although shifting there isnt recommended:)

http://www.srtforums.com/forums/showthread.php?t=246085&highlight=stock+dyno

http://images6.theimagehosting.com/scan0015.354.jpg

http://www.srtforums.com/forums/showthread.php?t=181495&highlight=stock+dyno

http://www.cobaltss.net/forums/showthread.php?t=20417
 
Status
Not open for further replies.

Users who are viewing this thread



Top