tr3650

  1. Slowings

    WTB tr3650 within 5/6ish hours of Upstate NY

    As title says.. thought about rebuilding myself but I think it may be out of my level of experience and don't want to spend a lot of money just to screw it up myself or pay big money on a shop rebuild.
  2. Jayystangz

    Ouchhh!! Tr3650 grinding 2nd and 4th gear

    So to my Surprise today while minding my business I decided to do a quick first pull (since it was in the shop)my 01 Cobra all went good until 3rd to 4th grinded horribly OUCHH!! Yup brand new clutch and everything about 1k miles or so and clutch in and try and change gear and Nope not...
  3. 0

    WTB: stock or aftermarket tr3650 input shaft

    Mostly looking for another stock one for a temporary fix so I can get the car home and still drive it on nice weather days while they're still around. 01-04 trans. Unless someone has a fairly cheap 26 spline they'd sell me?? Then I'll see what I can do, will definitely be buying a 26 beginning...
  4. B

    TR3650 Issues

    Okay, so I have an 04 Mach 1 5 speed. I've had issue after issue with the transmission lately. Long story short, new clutch is in and trans is rebuilt. Transmission was installed and it made of ton of noise, just like it did before it was rebuilt. Kinda sounds like it had gravel in it. Anyways...
  5. B

    Issue after clutch change.

    Alright so I have had an issue after changing the clutch in my mach a few weeks ago. It clicks. As long as I do NOT have the clutch pedal pressed in the transmission sounds fine. After pressing the pedal in after about 5 seconds this horrible clacking noise starts up. It is definitely something...
  6. G

    Cant remove trans HELP!!!

    so I have all the trans bolts out, all wire harnesses etc. crossmember is out dust cover bolts & starter are gone. I can only seem to get the trans to move off the motor about a 1/2" if that. any tips or tricks to get this thing out. ive been going at it for days now and no luck. any help would...
  7. G

    Tranny problem? HELP

    My 3rd gear in my tr3650 is grinding. when the car is cold, and you baby shift it goes in. once the car warms up(tranny) however or you try to jam gears it grinds bad. after about 30 miles of regular highway driving yesterday it wouldnt go into 3rd on the downshift until i let the car cool...
  8. P

    TR-3650 Questions

    Ok, I have been reading and looking over threads and such for a few days. Seems that I have a (to put it nicely) crappy service department at the local dealership. I guess i was blindly hoping that changed with a few years of new ownership. I have what seem to be ALL the typical complaints about...

Top