anyone want a free 99/00 ported blower?
It has roughly 130k miles on it, I took it apart to inspect the bearings, rotors, gears etc
The housing has some small scuffs from normal wear and tear from the rotors, the rotors still have Teflon on them, the port was done by me several years ago
It...
Looking for specifically a 3.1 or 3.4 (just the ring) pulley. Does not matter what colour. Would even do the 3.65 if someone happened to have one lying around. Let me know what you've got and how much you would like for it.
Hello guys, I'm looking for a stock pulley off a cobra (3.65" Dia) for some safe boost levels. Or a Billetflow 3.10 would work too, but would prefer the stock one.
Let me know what you've got, shipped to 59254, MT please.
Or even better if you are willing to ship to Canada use S7H 0A6, SK...
I am looking to buy a Eaton Supercharger.
Looking for a stock size. 3.65.
This size comes off of the 03-04 original blower.
Just message me or comment if you have one and how much you want for one.
VMP Tuning end of the year shop blow out!
All of this is stuff that we have laying around the shop that was either used for R&D, ordered for a customer’s car that didn’t end up following through, or used as a trade in by a customer. All prices are plus shipping unless local pick-up...
I'm selling the Eaton and throttle body from my 2003 cobra that is just sitting in my basement now that I've purchased a 2.9 Whipple. The blower is in good shape and saw 50k miles before it came off. It's in good condition and works great. It has a 2.8" pulley on it.
I'm asking for 350 for the...
hey guys I have a 03 eaton m112 with 30k miles off of a cobra,
I have:
-M112, Ive never used it personally, like all superchargers, its always recommended to buy a rebuild kit for it or replace all gaskets and supercharger oil before installation
-Plenum
-Throttlebody with gasket ( has...
Selling my M112 supercharger kit for 99-04 v6 mustang, I have pictures of everything, the fuel pump is a 295LPH and never been used, I was about to change for this one, but didn't have the time, also brand new spark plugs and wires.. Will throw in my tuner and the tune for the right price.., but...
My friend Christopher works at a local cylinder head shop and I have been wanting to port my supercharger for quite some time now. So I bought a supercharger off of ebay, and let him take it to the race shop to port it.
The eaton that I bought had already had a "half-assed" attempt at a port...
Bought an Eaton case off a member here a couple weeks to port it but decided I rather get a whole Eaton instead. The case had two helicoils due to broken bolts. All blower to IC bolt holes were drilled and tapped to allow a larger 6mm allen head bolts from Proweld Performance. These bolts are...
I am going to do a build for the tork tech kit with the eaton blower. I am looking for several parts that will make this kit complete.
1. M112 Eaton supercharger. Can be ported or stock. Would prefer if it came with the plenum and throttle body from and 03/04 cobra or 01-04 lightning.
2. 03-04...
I was collecting parts for an M112 conversion on my 97 Cobra. With new responsibilities i would like to sell these parts. I am not sure what a fair market price would be for these items. However i do know that some of the peices that i have obtained are very difficult to come by. The items i...