Price is $5,000 for the lot:
Everything is brand new in box, ordered around December of 2020. Have a few parts I ordered but decided against installing on my Cobra. Selling as a single lot and local pickup preferred due to size/amount of parts, parts are located just north of Chicago. I have...
Clean title car with under 46k miles. Tastefully modified. Specifics obtained from previous owner who built it are in the photos. Motor was built by Edison’s one off Customs at 38,000 miles or so, per previous owner. It has a race honed teksid block, stage 3 cams, new upgraded King bearings...
Clean title car with under 46k miles. Tastefully modified. Specifics obtained from previous owner who built it are in the photos. It has a teksid block, stage 3 cams, KB 2.8LC mammoth. Motor has like 7k on it. 26 spline input shaft, 8.8 SRA with 31 spline axles and 4.10 gears. Subframe...
So i have a 99 cobra (terminator engine) built with diamond pistons, slightly higher compression. I recently started having an issue where it will be full rich 10.0 on the wideband. Cruise around and itll go back to 14.2-14.5 while cruising around, then ill apply a little throttle to get over a...
What would our Cobro Coyote swap be without some BOOST?! Specifically the new Gen 5 3.8L Whipple Supercharger for the 2011-up 5.0L Coyote.
In this video, we go over the components of the Whipple kit, including what will and won't be used in the '03 Cobra Coyote swap (10 rib? 8 rib? Hybrid-rib?)...
What would our Cobro Coyote swap be without some BOOST?! Specifically the new Gen 5 3.8L Whipple Supercharger for the 2011-up 5.0L Coyote.
In this video, we go over the components of the Whipple kit, including what will and won't be used in the '03 Cobra Coyote swap (10 rib? 8 rib? Hybrid-rib?)...
What would our Cobro Coyote swap be without some BOOST?! Specifically the new Gen 5 3.8L Whipple Supercharger for the 2011-up 5.0L Coyote.
In this video, we go over the components of the Whipple kit, including what will and won't be used in the '03 Cobra Coyote swap (10 rib? 8 rib? Hybrid-rib?)...
What would our Cobro Coyote swap be without some BOOST?! Specifically the new Gen 5 3.8L Whipple Supercharger for the 2011-up 5.0L Coyote.
In this video, we go over the components of the Whipple kit, including what will and won't be used in the '03 Cobra Coyote swap (10 rib? 8 rib? Hybrid-rib?)...
2003 mustang cobra sonic blue
93k original miles
Unmolested vehicle
95% original car.
Borla mufflers
Jlt CAI
High output alternator (180amps)
Everything else stock
New spark plugs(TR6ix)
New fuel filter
Fresh oil change
Los Angeles, Ca 90606
30k obo
We got a lot of questions related to the fuel systems on late model Mustangs. We've actually compiled an FAQ page with our most commonly asked questions (click here to check it out).
With that said, we're going to dig a little deeper and let you know all the details on our very own Lethal...
We got a lot of questions related to the fuel systems on late model Mustangs. We've actually compiled an FAQ page with our most commonly asked questions (click here to check it out).
With that said, we're going to dig a little deeper and let you know all the details on our very own Lethal...
We got a lot of questions related to the fuel systems on late model Mustangs. We've actually compiled an FAQ page with our most commonly asked questions (click here to check it out).
With that said, we're going to dig a little deeper and let you know all the details on our very own Lethal...
We got a lot of questions related to the fuel systems on late model Mustangs. We've actually compiled an FAQ page with our most commonly asked questions (click here to check it out).
With that said, we're going to dig a little deeper and let you know all the details on our very own Lethal...
We got a lot of questions related to the fuel systems on late model Mustangs. We've actually compiled an FAQ page with our most commonly asked questions (click here to check it out).
With that said, we're going to dig a little deeper and let you know all the details on our very own Lethal...
****SOLD******* Selling my Gen2 2.3 VMP blower has 200 miles on it basically brand new! The VMP comes with 2 inlets, one for stock TB and one for aftermarket TB
2.9,2.8 & 2.6 pulleys
$2,500
Looking for some factory OEM front and rear springs for 2003 - 2004 Cobra, car has Eibach red springs and is just too low for the area I live in (probably too low even with factory springs but worth a try). Already replaced the exhaust once as the mufflers just got beat up too much and cracked...
Hello, I am looking for a cobra supercharger lower manifold.
Part #
2R3V-9J447-BB
preferably not ported
if you have one that is clean and in good condition, please contact me
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.
Jared’s first Mustang was his 2003 Cobra, which his son Luca claimed before he could even pilot a power wheels. Now, Luca is all grown up and it’s time to [re]build this 800hp monster.