Search results

As the title states-Basically new Vortech JT-B Kit off of a 2012 Mustang. Kit was installed, Dyno tuned (790rwhp through an auto @ 12lbs of boost), and is being removed. Nothing wrong with the kit-going Turbo. This kit is capable of over 1000rwhp. over $10,000 new. I am including the...

Looking to buy my old car back. It is a 2001 Cobra with the Following..... 2001 Cobra Body Fresh Silver Paint Kaenen Carbon fiber lift off hood Custom Turbo Kit w/ 95mm Turbo S95 Borg Warner Rear facing 110mm TB Wilson Elbow 5.4 Navigator motor Single Plane intake 25.2 Certified (6.00 and...

SOLD Specs: 2011 Mustang GT 5.0 30871 miles 6Spd Manual Trans 401a Premium Package 3.31 rear axle ROUSH TVS kit w/ 85mm pulley(625hp setup) AED 93 Tune Xcal 3 tuner Flashscan AFR Guage w/ ROUSH a/c vent pod NGK Tr7-ix plugs FMS 47lb injectors JLT Big Air CAI AFCO dual...

Used MGW Shifter for MT-82 Trans. Excellent condition. $250 Obo [email protected]

Looking to swap a stock air box CAI Setup, or Roush CAI onto my TVS equipped 5.0. Any Roush or VMP guys out there with a stock box lying around? I would need the lower box assembly also.

Perfect Condition. Had on my 2011 for 500 miles. Going TVS, and need a new CAI. $200 shipped. [email protected]

As the title states..... Kit includes everything except Bottle brackets (Cf bottle works with standard 20.00 brackets), and pills. Comes with 2 Extra N20 Solenoids (1 NOS Powershot, and 1 Lg Zex), and various lines/fittings. You would also need the appropriate fuel line adapter if...

As the title states..... Kit includes everything except Bottle brackets (Cf bottle works with standard 20.00 brackets), and pills. Comes with 2 Extra N20 Solenoids (1 NOS Powershot, and 1 Lg Zex), and various lines/fittings. You would also need the appropriate fuel line...

2003 Mustang Cobra 20,5xx miles on the body Motor is 100% fresh-0 runs. 5 miles for break in so far. Also has new front brakes. Body is 9/10, Interior 9/10 No Wrecks. Car is located in Wentzville, MO. PICS/VIDEO's: http://smg.photobucket.com/albums/v484/StusWS6/03Cobra/ Mach...

Fully welded/mandrel bent xpipe setup for Kooks 4v headers (may also work with 2v depending on header location). System consists of Kooks female stainless ball/socket connectors, 3" mandrel bends to/from Xpipe, and 12" Dynomax race bullets w/ dumps. Setup will bolt right onto your Kooks 3"...

1 3/4" Ceramic Coated with 2.5" collectors and V-bands. Excellent condition 600.00 obo Travis 636-219-8972 [email protected]

Selling my C4 setup. Trans is installed in my 03 Cobra, and can be removed immediately. Going with a Pro Mod Glide for my new project. Everything is in perfect condition.... 10 passes on the setup. Best mph was 145.8 (1/4) & 118.9 (1/8). 1.361 60' @ 3500lbs and 25psi. Converter is perfect for...

I am selling the motor out of my Cobra. This setup has only 10 passes, and about 250 street miles. Motor was ordered 5/2008, and installed 7/2008. All machine work (with the exception of the heads), assembly, and specs were performed by John Tymenski of Modular performance. He even flowed...

03 Cobra complete fuel tank with pumps/sending unit/all emissions equipment. Tank has 30k miles on a stock car. 400.00 obo Travis 636-219-8972

03 Cobra pulley bridge w/ all stock idlers and tensioner intact. Billetflow black snub idler installed. 30k on the stock parts, 5k on the snub. 150.00 03 Cobra stock intercooler w/ o-ringed tubes & outer fitting 350.00 I also have many other parts for an 03 Cobra project/conversion...

I had a great day of racing yesterday. Big thanks to Bob @ Kurgan Motorsports, and John @ Modularperformance. First pass off the trailer---no ice in ic box, 3.8 pulley/stock lower. Very soft launch---just wanted to get down the track: R/t .119 60' 1.509 330 4.119 1/8 6.262 mph 114.50...

Complete Metco 10rib X10 setup+++ base Kit (w/ single upper/lower pulley) was over $1k. Over $600 in additional parts. Cures belt slip issues on high boost Whipple/Kenne Bell setups. Includes: Metco x-10 Kit Whipple 3.5" Upper Various (4) Kenne Bell uppers (3.10, 3.25, 3.55, 3.75) 3...

Complete Metco 10rib X10 setup+++ base Kit (w/ single upper/lower pulley) was over $1k. Over $600 in additional parts. Cures belt slip issues on high boost Whipple/Kenne Bell setups. Includes: Metco x-10 Kit Whipple 3.5" Upper Various Kenne Bell uppers 3 X-10 Idlers 1 X-10 Flanged...

***1993 FORD MUSTANG SVT COBRA*** Vibrant Red/Black Cloth interior 37,511 ORIGINAL MILES! THE EXTERIOR AND THE INTERIOR IS A STRONG 9 OUT OF A 10!!! The front seats have been replaced with Recaro seats. Fully Functional Back seat. This is a STREET car and will run at 180 degrees...

Looking for any and all 10 rib lower/Metco X10 pullies. Also looking for 10rib upper (Whipple) pullies. If you've got some laying around----let me know. I would even be willing to rent/borrow them from you if your not looking to sell. I am going to the dyno, and need a few different...

Sold

03 Cobra intercooler 20k total miles. I had the cooler cleaned professionally, and pressure tested when I installed my built teksid. Less than 200 miles since the cleaning----extra clean. 350.00 Travis [email protected] 636-219-8972 I can snap some pics tonight.

I need a 03-04 Lower intake manifold for a project I am working on. Let me know what you've got. Manifold only----no intercooler needed.

No longer for sale

Complete Horsepower by Herman 4r70w conversion for sale. This setup has extremely low miles. I purchased the car with the setup already installed (by Herman), and the tranny was freshened by PA 500 miles before I purchased it. I have put 200 miles on the car---mostly street miles. I have locked...