I have a blue LED raptor shift light I want to sell, it came off my totaled GT and now have no use for it.
Asking 75 shipped via PayPal will ship once funds are confirmed.
Good
It's cheap
Not so good
I had very little time to get it off and thus had to cut the wires fairly short, as you can...
Just wondering so we can have someone to contact to sticky threads ect. Plus as I see it the forum will only get larger, although it will likely remain a small subforum in this site but it would be nice to have one person to deal with any issues that may arise as I know the Admins on a board...
2013 Ford Focus
Tangerine Scream is the color and it has every option but the heater block which isn't needed because I live in central Texas
no more blabbering more pics I know I know
Bone stock
free pollen mod that everyone in San Antonio has right now
Cane I'm borrowing...
....a 2013 Ford Focus ST3
a lovely little car that is also leaps and bounds more practical than the mustang
Tangerine Scream is the color and it has every option but the heater block which isn't needed because I live in central Texas
no more blabbering more pics I know I know...
Poll incomming
So monday I wrecked my 2013 Premium GT and of course just threw about 2500 bucks on the car in suspension work along with almost all of the various mods common to these cars sans a tune. Due to other reasons the car didn't get to the shop until today and the appraiser called...
Stock the day I brought it home
After tint, first mod for most Texas cars
Next Mods were not really visible
MGW Shifter
Radar Permanent install
Raptor Shift light
FRRP After cat X, Removed the resonators, GT500 axleback
The Axle Exchange 1 piece driveshaft and BMR Safety loop
Next up...
'13 Candy Mods so far
Stock the day I brought it home
After tint, first mod for most Texas cars
Next Mods were not really visible
MGW Shifter
Radar Permanent install
Raptor Shift light
FRRP After cat X, Removed the resonators, GT500 axleback
The Axle Exchange 1 piece driveshaft and BMR...
Guess on my best run
Car is a 13 GT M6
After Cat X
Gt500 axleback
MGW(I know not power but better shifts help)
Single Piece aluminum D/S
BMR UCA/LCA
BMR springs
One inch drop on BMR springs
Tokiko D-Spec(just once I get them dialed in right)
Street tires are BFG KDW2's 275/35-18 on...
Anyone by chance have the part numbers for the factory chrome bezels that go around the A/C vents and the speedo gauges?
I need to order another set so I can have them painted and installed, I don't like the chrome as it hits my eyes as I'm driving to work, minor issue I know but I want it.
So I got all of my suspension ordered and paid for along with the labor. Came out to a little under 2500 all said and done installed and walk out.
Parts
BMR Lower Control Arms, Boxed, DOM, Non-adjustable, Polyurethane Bushings TCA019
BMR Adjustable Upper Control Arm UTCA032
BMR Upper...
Why didn't someone warn me about how much of a pain in the ass that was going to be. Sweet mother of baby Jesus after that I never want to work on my car again. Problems started from the beginning and went all the way to the end. Screws were the bitch to get out, then removing the brackets and...
Okay so mods in the sig plus suspension is already alotted for with the following, and have another 1500 to spend.
The full suspension will be
Tokiko D-Specs
BMR springs w/camber bolts
BMR upper and lower control arms
BMR panhard bar.
I have been thinking of the following but may...
Ok, I like, we'll I love the boss and the boss black accents.
I successfully did the lower valance on my mustang but I will eventually replace it with the boss one, now I'm topping with the idea of doing my regular style(with camera) in flat black like the bosses are. Even thinking about dooing...
OK, so I've gotten conflicting reports on whether Tokico D-Specs will or won't fit my 13 GT
Will they fit, I've read that they will IF you use GT500 strut mounts
I do plan on getting lowering springs, adjustable panhard bar, upper and lower control arms ect ect basically replacing...
Used a couple times but didn't really use enough to be worth the considerable price I paid
This is the model and comes with everything in the box except the manual which is available online
paypal accepted
price is shipped USPS and insured
price is 200 cash or trades accepted
Trades some...
I've been reading a lot and most of the posts here are saying pretty decent gains from headers and/or just an offroad X-pipe. My issue is that I don't want to go with an offroad midpipe. Will the power gain be worth it with Longtubes and a catted X? I was looking at the stainless works LT's with...
Okay so I spoke to MGW and they have our shifter pattern done it just isn't listed on the website.
Which would you buy if price wasn't an option, I'm having trouble deciding, I've had a gripper before but I like the looks of the composite race knob a lot.
I will be getting the knob with...
I bought these
2 in 18x8(18.6 lbs) and 2 in 18x9.5(21.1 lbs) which are significantly lighter than my stock wheels-FYI they are rotary Forged TSW Nurburgring
2 of these in 245/45/18 & 2 in 275/40/18 because they didn't come any wider for the rears-BFG KDW T/A's
They are going on this...
So I had the resonators removed on my car, maybe it's the axle-back on my car but it doesn't sound THAT much louder than my previous set up. The shop that did the work was awesome for some mom and pop shop I've never seen no much attention given to such a simple job.
It was 60 bucks charged...
I'm preparing to buy my TSW wheels on the mustang my current tires have only 4k miles on them they are the factory 18x8's
Should I buy the 18x8's which means I don't need new tires
OR
Should I buy the 18x9's which will be significantly more expensive?
The car will be 98% street and...
My shop recommended these and while I always trust my shop since they have never steered me wrong in the long time I've been using them. However, after looking at the bmr website it only shows compatibility with 05-10 mustangs not 11+.
Will they work, I need confirmation before I order...
That is safely, without rubbing and modifications? I remember on my old 97 cobra I could easily fit 315's on there. I keep seeing the "reccomended" tire width for a 10 inch wide rim is a 275 which to me seems a bit too narrow unless its a rubbing issue that I just don't know about.
I searched...