Search results

Got it all done today. Started with a 3/16” drill bit, with some “Dark Thread Cutting Oil”, wasn’t making much progress. Found a video of a guy using a hole saw bit (typically used to drill holes in tile or granite) so I ran to Home Depot and picked up a couple. Those were working well, ended up...

Alright guys, I’ve got a real problem here. I just got my transmission back from Calimer (stage 3 build) and I went to put the slave cylinder in and the bolt broke. I was using the original bolts that held the old slave cylinder, I felt the bolts start to get tight, but the slave cylinder was...

The second link you sent worked. I'm not sure what you sent the first time.

I'm going to try doing a vacuum bleed and see if that takes care of it. I did the gravity bleed by jacking up the front driver's side of the car and pumping the clutch a billion times, but maybe there is still air in the system.

This is what I did Unauthorized Access

It’s definitely a different transmission from 2008-2011. The 2011 was the first year of the 6 Speed manual. The clutch pedal position switch was not affected on the old pedal assembly, however I ran into a really weird issue related to that on the new one. The bracket that holds the switch is...

Yes, it is a hydraulic clutch. It is the factory MT82. I can’t open the link, but I basically just swapped out the clutch/brake pedal assembly with one out of a GT500.

Can you elaborate? I put a mcleod braded steel line in it a few years ago.

I have a 2011 GT/CS with an Exedy Stage 3 clutch, it has been in the car for years. Recently I replaced the clutch pedal assembly with the one from a 2011 GT500. The reason I replaced it was that the bracket on the original assembly that holds the cruise control sensor was broken, crazy that the...

Hey guys, I replaced my clutch switch for the cruise control on my 2011 GT/CS, now I can’t get the **** thing back into place. Does anyone have a trick?

Hi guys, I have a quick question about hub centric rings. I have the below linked wheels (staggered) and I called American Muscle and the rep told me that the Wheel bore was "about 70mm" so i ordered the set with a wheel bore of 70.3mm since that was the closest on the website that I ordered...

About a month ago I got off the interstate after about a 2 hour drive and pushed the clutch to the floor and the pedal did not come back up, just stuck to the floor. I read on a couple forums that the cheap plastic clutch line that ford puts in these cars is a common diagnosis for this, so that...

I have been having trouble with my coyote overheating since I bought the car in August with 15k miles. It only overheats with the A/C on and when stationary, once I start driving it cools down. Water pump replaced in August, thermostat replaced in November, and fan assembly with switch replaced...

I have been having trouble with my coyote overheating since I bought the car in August with 15k miles. It only overheats with the A/C on and when stationary, once I start driving it cools down. Water pump replaced in August, thermostat replaced in November, and fan assembly with switch replaced...

I have a 2011 Mustang GT, JBA Long Tube Headers, Cobra Jet Intake Manifold, Monoblade Throttle Body, Bama tune. I have been running this setup for about 4 months now, gave me some problems ion the beginning, but has been issue free for a couple months. Then yesterday, the car goes into limp mode...