Recently I installed a 2.2 kenne bell supercharger with a 3 inch pulley. It replaced the Eaton supercharger with a 2.80 steeda pulley. No other pulleys were changed. I have a stock lower crank pulley, metco's 4 piece idler kit and a 2R3Z-8620-BC part number belt.
Im currently driving the car...
Im 80% complete installing the kit. Its wired ,tanks finished and feed and return lines are ran.
Im having problems with where to mount the regulator (hits my hood where lethal mounted theirs) , which way to feed the rails, and where to put the Y block.
The directions are saying to run the...
Im installing a kenne bell blower and for the first time ive seperated the internal intercooler and eaton blower thats been on the car. It spins nice freely and the intercooler doesnt seem to leak, however the sides of it are almost black and the cavity of eaton has a nice clean film of oil on...
It may be a long shot but the one on the blower i just purchased was damaged during shipping. If any one has one or knows where to get one from please let me know.
Thanks.
After getting shot down by a trashed blower and unsufficient funds the first go around, I finally was able to get everything I needed.
Picked up a 2.2 kb blower with 3k miles Accufab sbtb, 80lb injectors, ba3000 maf, and a 40 amp bap, as well as a extra cobra lower plenum for 3k shipped...
Ive had a coolant leak that only occurs when the is running. its running from behind the crank pulley and up the timing cover. I tore it down this morning and noticed the weep hole was dry on the water pump but everything below the freeze plug and the bore the plug is pressed in was saturated...
My friend has a 1 owner 93 gt hatchback with 96k original miles. royal blue upper, titanium lower. (my ideal color combo)
unmolested other than full exhaust and 3.73 gears and a full 5 lug rear disc brake setup from a 96 cobra.
the paint is flawless other than a small patch by the emblem on...
I believe mine is shot, leaking from the weep hole. looking for a replacement, where should I purchase one from or are the ones stocked at local parts stores sufficient?.
Also does anyone run waterwetter? I used it on my car worked great on the trip to the American muscle car show.
data logged the car, 100.3% duty cycle at wot.. yikes..
my cobra has a 2.8 upper longtubes catless exhaust and a jlt ram air intake, with a ported bbk throttle body egr delete,bama tune and a bap.
i recently installed the jlt, and now at wot it cuts out at 5500-6000 rpms, I thought it was...
I repositioned my driveline on my mmr k member and in the process coolant started to drip from the passenger rear of the head and onto the collector of my header, I looked for any cracks or breaks on the fittings from the ldc chicago headcooling mod and I dont see anything that would cause a...
With the suspension unloaded, when I move the lower control arm up and down, the shock moves id say about 1/4 up and down through the caster camber plate, It makes alot of noise going over bumps. Heres what I cant figure out, its only doing it on one side other side is fine no movement.
I have...
fits 99-04 gt/mach1
Im not even sure if it has 1,000 miles on it. sounds awesome going back to a chambered muffler.
asking 500
would rather not ship I tossed the box and packaging material that it came in, plus its still on the car
(2) Bbk off road H pipes for bbk Long tube...
Im going to a return style I wont be needing any of this, these items have been collected from other members on here they are in excellent condition and in 100% working order from my understanding, browsed around for pricing hlep me out if im too high.
Granatelli BA2400 maf stock size...
I have a fuel tank left over from a mach1 i parted out, I know the hat is different because of using twin pumps, but other than that what is the difference between the two?
Reason I ask is I wouldnt mind having a extra tank to install my aftermarket hat and pumps for the cobra with out...
Ford Racing Gen II 2.3 whipple
serial number W3A-2606
Im at a cross road with what to do with it. 20,xxx miles bought it used and its been sitting in a box since last feb...
last year i bought a used gen 2 2.3 whipple with supposedly 20,xxx miles.
Its had a 3.5 inch upper pulley all it's life, pervious owner ran 13lbs on it.
Its been bugging me for a while now so i thought id ask, the tips of the fins are lightly scuffed, and I have a few score marks on the...
I had a vacuum leak from a hose going to my autometer boost gauage.
Its been like this for roughly 6 months my idle was a tad high 900 rpm never really thought much about it.
I decided one day to hunt down the hissing noise I kept hearing. wasnt a very loud hiss like typical leaks...
odd request.
I need the catback hangers.
1 bolts to the floor by the fuel filter which supports the piping over the axle.
2 the hangers that support both mufflers.
should be three total hardware as well.
I swapped out the irs and need the hangers from a 03-04 mach or...
first time ive ever been to a 1/4 strip 1st pass was a 12.6 120 mph
best time was
12.2@116 mph
.143 r/t
60ft 1.9
12lbs stock eaton. longtubes bolt ons solid rear with 373 gears
street tires 315s nitto zr xtremes
leaving at 3,000 rpms
i ran out of time but i think i could have done...
probably posted before, ive looked but no definite anwser.
this kit:
DRI 03-04 Cobra "GT" Fuel Pump Kit on a stock hat
+
40amp bap with (1) modified fpdm,and 60lb injectors
will the stock harness for the fuel system support it? or will i need a wiring upgrade. for the bap...
while at a cruise in tonight, my clutch was sticking and then eventually failed.(stuck in gear.)
I got a feebie tow home but now i need to figure out what to do with it.
cable isnt broke that i know of, i believe its just the firewall adjuster ,theres just too much slack in it to...