Very RARE - OEM/NOS Ford Racing Original 03 - 04 Cobra Clutch Kit (M-7560-D46)
This Clutch kit hasn't been available for several years now and the stock unit is extremely smooth and holds quite a bit of power. Great for a low mileage or show car that's 100% original or if you like a...
OEM/NOS 03 - 04 Cobra front bumper Chin Spoiler in original box (unopened).
Purchased a few years back from a person that had several of these and agreed to sell me one.
Asking $300 plus shipping.
Buyer pays 3% fee via paypal or pays as gift.
Contact Rich via phone or text at 828-409-6552...
I have 4 sets (8 blades) of OEM/NOS 03 - 04 Cobra Air Foil wipers in Original Motorcraft packaging.
These are very rare/hard to find since they have been discontinued for awhile know. Came on the cars when they were new to kept wipers planted on the windshield at high speeds.
Asking $80 per...
OEM/NOS 10th Anniversary Drivers Seat Covers.
Extremely rear/hard to find. Make your drivers seat look new.
Priced just reduced to $600 Shipped/Insured. I paid $900 for this a few years ago.
Buyer pays 3% paypal fee or pays as gift.
Contact Rich via phone or text at 828-409-6552
Thank you.
DSS Carbon Fiber Driveshaft for 03 - 04 Cobra. Used for 500 miles.
improved critical speed compared to aluminum and reduced shock to the transmission gears (smoother shifting) and rear end during severe loading by adding more twist.
Sells for $1259.99.
Price just reduced to $700...
Car is SOLD as well as most of the VMP Gen 3 2650 and related induction items, RXT clutch items, Magnaflow aexhaust, and the Stifflers Matrix system.
All OEM/NOS 10th Anniversary items and some other items are still available and will be listed in the parts section after I talk with a few...
SOLD! Thanks SVTP....
Selling Brand New In Box Fore Dual Hat with Wlabro F10000302 (Ford GT "Improved" Supercar Pumps). Returnless system good for 600 HP or up to 700+ with BAP.
Moving to larger fuel system and E85, so I no longer need this setup..
Asking $600 shipped or make offer...
Set of ID1000 injectors (On 03 Cobra for about 3000 miles with Gen2 TVS 2.3, 93 octane only. No E85). Just picked these up on here, but moving to E85 on Gen3 TVS 2650 so I need bigger fuel delivery and injectors...
$600 Shipped! SOLD
Please PM or Text me at 828-409-6552. Buyer pays with...
Upgrading to a new VMP TVS Gen3 2650 on my 03 Cobra and need to go a different route, so have some brand new (unused) parts available.
Brand New – Set of 8 Siemens Deka 60lb/hr (630 cc/min) Injectors (Part # 108191). Same as Ford Racing Injectors that sell for $50 each. $225 shipped...
Hi,
I'm looking for a Very Low Mileage (lets say 5,000/10,000 miles or less) or NEW/OEM Eaton M112, or a Low Miles Posi Ported Eaton M112 with a port matched Dragon TB and Plenum. I had Posi's last port using a low mileage Eaton, but let it go last fall. Seeing if I can get that one back...
Up for sale is BNIB Baer Eradispeed Plus-2 2 Piece brake rotors and hats for 99-04 Mustang Cobra. Everything needed to bolt directly onto 03-04 cobra using your stock brake calipers/pads/etc. Also fits with Ford Racing 2000 Cobra R calipers with minor pad baking plate trimming at the bottom...
SOLD!
For sale are Brand NEW in box(s) Brembo's Gran Turismo Big Brake Kit for SN-95 (99 - 04 Mustang/Cobra) fronts. 13.1" (332 mm) x 1.25" (32 mm) Two-Piece Rotors and Larger GT1-F50 type 4 piston Radial mount Calipers with 40mm and 44mm pistons.
This kit is a significant step up from the...
I have (2) BNIB Maximum Motorsports (Race MM2 - Bilstein ) Front struts for a 94 - 04 Mustang (Also fits 1979 - 2004, see below). Can be used with coils or coil-overs.
Part No. V36-4138-MM2a. Cost $539.94.
Asking $400 shipped in continental US. That's $140 off, 25% savings)!
Valved for...
hi,
Probably a long shot, but I’m wondering if anyone on here is going a different route and has a VMP GT500 Throttle Body and Elbow for a VMP TVS Cobra setup?
One was on here a few months back and I missed it.....
Not in a hurry, but ready to buy if a deal comes up.
I have a brand new...
hi, I’m looking for a pair of Cobra IRS ABS sensors. Please let me know what you have. Paypal ready.
Please PM me or text at 828-409-655two
Thank you!
Rich Hexemer
Hickory, NC
Hi,
I'm selling my Dragon Throttle Body and Plenum that has < 1000 miles on it. Not ported. All gaskets included.
Was sent back to Dragon when it was new to rework, so there are no idle or sticking issues.
Asking $550 or BO. One of these sold a few days ago in a few hours....
All boxed...
Removed shipping costs and reduced price for increased savings....
Ok.... I would like to clear these out so I can do some TB upgrades on my VMP TVS, so I'm lowering the price to:
Brand New In Box - Polished Accufab TB and Elbow - $400 shipped (that's over $150 savings) SOLD!!!
Brand New...
Hi, I'm looking for a slightly used or New Kenny Bell BAP -40 Amp (#KB-89069) system to go with my upgraded blower, injectors, and MAF on my 2003 Cobra.
Please PM me or text me at 828-409-6552 if you have one you's like to part with.
Thank You!
Rich
Looking for a new or slightly used SCT BA2600 MAF for my 2003 cobra to go with my Posi ported blower...
Please PM or text me at 828-409-6552 if you have one you'd like to part with.
Thanks!
Rich Hexemer
Hi, I'm looking for a BLACK 2.93 non-slip BilletFlow Pulley (no hub needed) for my ported Eaton M112 that already has a 2.76 Billetflow pulley and hub.
Please PM or text me if you have a new or lightly used (perfect) one you're willing to sell for around $50 since I've seen a few go for this...
Guys,
I'm hoping to find a Whipple Idler pulley (part no.: 464-ADJID) to use with my 2.76 pulley on my Ported Eaton so I can retain the stock pulley for a stock/stealth look...
If anyone has one or knows where I can get one please let me know. PM PM me on here or text me at 828-409-6552...
Hi, I'm looking for a ported Eaton M112 (with or without Throttle body) that's in good shape.
Either Posi or Steggy Stage 7 or 8.
Looking to make 500+ HP/FtLbs with 60 pound injectors, KN boost a pump, and SCT 2600 MAP. Have bassani headers, bassani x, Borla stingers, JLT cold air, and...
So I just installed my Livewire TS + and been using Livelink to change the Configuration and a few other things. I want to view and datalog AFR and was wondering what the Terminator guys are using for wideband kits to interface using SCT's Firewire analog input.
Please help me decide between...
Hi,
I recently installed a SCT Livewire TS+ on my 2003 Cobra and have been adjusting and monitoring things with it and using Livelink II. I want to also monitor and data log boost and know you can't use the stock 2 bar TMAP sensor with a FireWire and need to install a seperate GM 3 bar MAP to...