Search results

I just installed a set of the BMR Lowering drag race springs, strange 11-14 adjustable struts and 05-14 rear shocks. The problem I'm having is that there is no difference between you having them set on 0 or 10, the suspension is stiff as heck. There is no transfer of weight at all, it's 100...

I'm wanting to replace the race star lug nuts that I got my race stars. There beginning to round off and I've only had the socket on them twice. I want to switch over to a Mcgaurd closed end if possible, I've seen people praising them, but I'm not sure which part number it is I need to get. Any...

I'm currently running jlt cia, ported boss intake, and a ported stock tb. I was considering swapping over to FI, but have decided to keep it N/A with a possibility of nitrous assist, and was thinking of swapping over to a ported cobra jet, mono blade tb, and a ford racing cia because that's what...

I hope I can get some help with some suspension questions. First of all I've have never done any suspension to a car until recently and that was just adding BMR non adjustable lower control arms and relocation brackets. I'm looking to add a set of BMR lowering drag springs, adjustable shocks...

I'm getting ready to put a power adder on my car and been looking at fuel system and recently saw a post that his fuel system mentioned, from what little info I have found about it, it looks like it would be perfect for what I'm looking for. I'm looking to make 650-700whp on e85 and that's it. I...

I purchased a set of 15x10's for the rear of my car now can decide which rear tire to use. I really liked the Mickey Thompson Et street R's and planned on getting them in the 28/11.50's but then found out there were a bias ply. I want a radial tire, this will only be for street driving. I...

Please Pm me a price shipped to 77836, or could be picked in College Station, Tx To save on shipping. Thank you

Just purchased a set of 17x4.5/15x10 race stars for my car that I plan to run all the time. just seeing what everyone is running or recommends for tires. I would prefer 28" in the front, car is a m6 and is far from a dd ( had it 4 years only has 8k miles) but will see occasional 50-60 mile...

I just installed a Exedy stage 3 clutch and the Exedy light weight steel flywheel. Now it idle when it's warmed up there is a rattling noise when the clutch is engaged, when you push in the clutch pedel it goes away, I am running a the ghost cam tune. The stock clutch and flywheel made a little...

I'm installing a new exedy mach 500 clutch and light weight flywheel, can I reuse the factory flywheel and pressure plate bolts, and if so what are the torque specs. The car has rite at 8,000 miles on it. Thanks

I am seperating the clutch from the brake fluid resivoiur and installing a new aftermarket clutch line and some tilton fluid, my question is how do I flush the old fluid out of the slave cylider so they are not mixed??

Recently installed a boss intake, today after trying my first high rpm shifts I got the dreaded lock out, I'm wanting to change the clutch before I mess the trans up and was wondering what would be a good upgrade. I was trying to keep the stock flywheel and every thing else just change the...

Those of you who are storing fuel in drums, what type of pump are you going with, I bought a hand crank style pump and it worked once. I was thinking of going electric but can't find a I nice cheap one that will pull fuel, only ones that will gravity prime. I hang my drum sitting on a furniture...

I swapped from a upr offroad x, too knock off pypes headers Took it back to same dyno that I always use. The only thing that he did different was this was a snap shot, not really sure what means he only said the torque would show a bit high which it did unless I have a freak lol. Anyways to the...

Do I need to get a new tune now that I've added headers? I'm switching from an off road xpipe so my rear 02 ' s have already been tuned out. Thanks

Anyone with a m6 running 26" slicks with 3.55's? Just seeing if anyone is running this combo, and if you are having to shift into 5th in the 1/4.

I put my car back on the rollers a couple weeks ago at a local dyno to get a baseline on this dyno, then I picked up a extra stock intake and ported it, installed it yesterday and took it back to the same dyno. There wasnt a huge improvement but every little bit helps. may or may not pick up a...

Went back to the track last sat. Only change to the car was the tune. The weather was a little warmer since the track was open during the day. Previous best 1.77 60' 7.76 1/8 90.16 1/8 mph 12.03 1/4 114.30 1/4 mph New best 1.76 60' 7.52 1/8 92.84 1/8 mph 11.68 1/4 116.97 1/4 mph I had to get...

Dynoed my car today on a Dyonjet, mods in sig. SAE-----------407.06 HP 414.80 TQ Uncorrected-423.12 HP 408.34 TQ Had a friend with his big cam only 02 WS6 getting dyno tuned it only made 396 HP 367 TQ I plan on going back to the track Sat to see if I can get an 11 with the new AED tune.

Just installed my new tune from AED. Seems like a while new car from the previous tune I had. The drivability is nite and day. By far the best customer service. Now I'm just ready to get back to the track and see if I can get an 11 lol.

Sorry to start another boss intake thread, but the dang search button won't work on my phone. Now to the question, where is the the best place to perchase it from and what all do I need for the install? and for those who have installed it do you change to a heavier weight oil because of the...

Has anyone switched from a Steeda tune to an AED or any other tuner and had any better performance?

Took the car to the track last Friday since the weather was good around 45 degrees. Last time out I ran a [email protected] with a 1.83 60ft. This time I ran a [email protected] with a 1.77 60ft. Was hopeing for an 11 but that as close as I could get lol.

Took the stang out to the track for the first time last friday nite. had the factory Brembo wheels on the front and a set of 16x7 v6 mustang wheels with 26/9.50/16 Hoosier QTP on the rear. Car has 3.55's. best pass 60'- 1.83 330'-5.09 1/8- 7.83 1/8- 89.53 1/4- 12.13 1/4- 114.18...

New member here with a question, I have a 2013 Mustang with Brembo brakes. I was wondering if the 16x7 wheels off of a 2008 v6 mustang would fit on the rear of my car. I found a set cheap, I planned on mounting some drag radials on them. Thanks Wes