Recent content by svtvm03

i installed a mm quadrant and firewall adjuster stock cable from mm the pedal is to high up and the clutch grabs to high too. i adjust the fire wall adjuster and the clutch is slipping . what am i doing wrong . i have no play in the cable . need help bad.

looking for pics with sra swap to see how they sit on 2003-2004 cobra coupes with 17'' wheels and 18'' wheels

i going to replace mine with center foce clutch kit . going to by a finaza flywheel neede to know what was stock thanks

I need pics on cobra that did sra swaps and see how they sit and what size rim you have on . i did all this work and the rear sit high in the rear and real low in the front this is what i did . ''please need your help'' i did the axle swap from a 03 mach 1 and put it in my o3 cobra ...

have a 2003 cobra lowered ,it has stock rims with 275-40-17 in the front and 315-35-17 in the rear. springs are H&R race springs mm isolator in the front top and bottom in the rear only on the bottom . shocks and struts are koni adjustable. my front sits nicely. my problem is the rear, it...

i have a daily driver 03 cobra looking to lwer it 1.5 which srings should i get .

i was told that not to use platiunm plugs in a cobra motor.i see people use tr6 0r tr7ix . my setup is like this jlt cold air intake acufab throttle body plenm steeda 2.80 pulley and idle pulley afco dual pass h/e so what is the best plugs for my car with these bolt ons .

by install the pprv delete is there i priming problem . like do you have to cycle the key to build up pressure on the first start up or just start the car right up and the pressure is just there. i was told by a ford tech that pprv is like a check valve that keeps pressure in the line so you...

i am buying a accufab throttle body and peolpe told me that the tps has to be retuned to the throttle body. does the tps have to be tuned in when every thing is bolted up on the motor or just bolt it onto the motor reset them computer and you are good to go.

i am buying a heat exhaanger want to put svt or cobra but i dont know how and were to get it from.

looking at fluidyne 3 roww or afco dual by pass.

i am looking to up grade my stock pulley to a 2.80 . which company is the best one and looks like stock. how much is the kit go for, with every thing .if you can help me out thanks

I have a 2003 mineral grey cobra i was look to see how many were make that year . I heard that a few were made. Mine is #709 out of 8394 made .

i have a stock cobra and want to change the plugs for the first time. which plugs are the best.

I put a centerforce df clutch on my cobra that has a catt back system and a cold air intake. i inatalled it on the stock flywheel with out surfacing it, the flywheel has 27,000 miles on it . i just scuffed it and put the new clutch kit on and know it chatters . what is the best thing to do ...