AccuFab throttle body and pluenm

[svtvm03]

i am buying a accufab throttle body and peolpe told me that the tps has to be retuned to the throttle body. does the tps have to be tuned in when every thing is bolted up on the motor or just bolt it onto the motor reset them computer and you are good to go.

 

[bigmoose]

you need to have a voltmeter. you probe across the ground and the signal wire. with the ignition on but NOT running you want to loosen the TPS screws and slightly tilt it until the meter reads between 0.98 and 1.00 VDC. then tighten and you're done. might be a good idea to check it a few days later to make sure it hasn't moved.