Recent content by Hilander

Went to the local track again in mile high Albuquerque. Weather was great D/A was 7200 wooo hooo. Thats pretty good air for here :( Temps in the high 60s low 70s. I ran at full weight, tailgate on, amp in, stock wheels and tires. Nice to go to the track without a trolly jack and racing...

Wondering what pulley ratio to boost you are seeing? Exhaust setup would be good too? As for me. 4" upper/ 2 pound metco lower = 15psi 3.5" upper/ 2 pound metco lower = 18psi I run Kooks headers along with high flow cats and Silver Bullet Exhaust. PS my total boost should be lower...

Had the Lightning down for a while, should be up and running soon again. The neighbors dog had to pose for a pic. Got the idea for this pic from screaming01 Some Pics of the motor in place Lots more work to do.

I did the Super Duty trans cooler mod a while back. I ran the lines through the radiator same as stock. For those that have done this mod has anybody just ran the lines from the trans to the cooler and back? Missing out the trip through the water radiator? If so any problems? Is the trans...

Here are a few pics of JJ's Wicked Suspension and Power Rack. I spent some time cleaning the frame, painting etc. Also fitted a set of R1 Concept front rotors. Been a good amount of work but I think it came out ok. My truck is a 2000 so the stock steering was not as responsive as the 01 and...

For you Mod motor engine builder types. Just got my motor back from being rebuilt. The bolts and risers that hold the cam covers were in the wrong order so I removed them to put them in the correct order. With the cam covers off I checked a few things. I had new timing chain tensioners...

Looking to buy some new or upgraded shock isolators. Anyone have any suggestions? Parts places and Ford want to sell me the complete shocks.

What is it with car parts places? I go to Napa today with a sample cam bolt kit I purchased from them. Me Two of these please reading out the part number on the kit. Napa: It’s not coming up, we don’t have it. Me: It’s for a Ford F-150 one of the most popular vehicles made. Napa: What...

Anyone have the part number for the old all steel timing chain tensioners? My local Ford dealer only gets the plastic ones.

SCT BA2400 MAF This item is in new condition. SOLD

SOLD I am selling my Whipple Supercharger 2.3L Fits 2001 - 2004 Lightning's Comes complete with air filter,airfilter box etc. I have the egr tube also, it was never used. Kit comes with Whipple instructions. I had it set up for no egr so a few of the vacuum lines are missing. Easy...

SOLD Flex-a-lite #270 Fans I bought these fans from a member on NLOC but never installed them. I tested them and they work great. Everything seems to be included except I do not have a fan controller for it. Most people upgrade to a better controler anyway. Also the nuts and bolts are...

What power would the following types of valve jobs give on this combo. Built motor with ported heads putting out 650 hp. Normal 1 angle valve job 3 angle valve job 5 angle valve job

I bought this unused from another member on NLOC. I changed my plans and never installed it. The kit should shave a good bit of weight of the rear. The kit comes complete with instructions. It is a direct bolt on except you have to have the axle stud flange turned down a tad. Looking...

These pulley's are in as new condition. They fit the 2.3 Whipple Supercharger. Price for the 3.0 is 40.00 shipped. Price for the 3.375 is 30.00 shipped.