finishing up my remote tune. PDB hit it out of the park with their remote tune. Been driving it for a little while now and have no complaints. Very solid kit and power is everywhere in the band. looking down the road to have the block built and port the blower and put a bigger throttle body on it.
Edelbrock PN 15838 - used everything there. nothing else was needed
VMP IAT relocation harness fro 11-14 mustangs - make sure you use the plastic (not brass) IAT sensor (took me way to long to figure that out)
Edelbrock Cold Air kit (Edelbrock Mustang Cold Air Intake for E-Force Supercharger...
Just picked the car back up this week. Working on the tune now. Install was straight forward but make sure that you have the plastic IAT sensor, not the brass one. this was causing my IAT2 temps to read through the roof and throw the car into limp mode. I am trying to use a tuner local to me...
I am in the process of doing this now (ordered, waiting on delivery) - I ordered the 2015-2017 kit (15865) and should be able to use almost all of the parts from it. It will be a few weeks before I install but I am going to document the process.
I know that the GT500 15" brakes will not clear factory 19" premium wheels, but I am trying to figure out what size spacer I would need to make them fit.
I have studded tires on my 19" premiums for winter driving and I would like to keep that set of wheels.
I am currently on 20x11 and do...
Went to a one mile top speed event this weekend. Did 276kph with over boost kicking in about 500m before the finish line killing all the power. Before the over boost kicked in it was still pulling very strong, felt like she could do 300+. Fastest car was 346kph (twin turbo dodge viper). 8psi CPR...
I am in the market for a new differential and am looking for some advice. The car is a 2013 GT A6. It is a daily driver. I am looking for something that is a happy compromise between road racing and drag racing. The budget is ~$900.
Thoughts???
Hey,
I don't really post much here, but I figured this would be appreciated here. I am an Army Infantryman That works in the Defense Attache Office (if you are an E5-E8 looking for a cool job, pm me) here in Tallinn Estonia.
We just finished up with a SECDEF visit. Do to the nature of my...
Greetings from Estonia!
I will update this thread as my build continues on.
Details:
CPR Single Turbo Kit 76mm ~10psi remote tuned by AED (I start datalogging tomorrow :banana: )
Cortex Xtreme Grip Suspension System with JRi DA Shocks and Struts (Should arrive in about a week)...
I am looking to see if anyone can provide some feedback on a wheel and tire choice.
I am looking to put 20x10.5 et45 on all four corners (niche intake159) with 315/35/20 mpss.
The car will have cortex JRi DA coil overs and the cortex watts link
Pics of anyone running something similar...
I am looking at upgrading the suspension on my 2013 A6 GT.
How much would it be for some 2011+ Koni Yellows with BMR SP065 springs?
Also some BMR LCA relocation brackets and the LCA004 LCA?
Thanks
-Josh
Hey guys,
Looking for an installer for a single turbo kit on a really short timeline ( less than 2 weeks for install and tune). Car is a 2013 GT A6. I already talked to Lee at Blankenship but he doesn't think he would be able to make it. Need recommendations, thanks in advance.
Josh