I finally made the decision to sell the Whipple setup and go turbo. I’m trying to pick out a quick spooling turbo for a single kit. What is everyone’s experience with a Precision 76/75 and what AR? Should I be looking into other turbochargers?
Setup:
CG Fab Single turbo hot: 1 5/8” Primaries, 3/8” flanges in mild steel, ceramic coated
CG Fab cold side
MM K member kit
Fresh CNC’d 9 Thread C heads with upgraded springs and bronze valve guides
Todd Warren Spec’d turbo cams
Billet Oil Pump and Steel Tensioners
ARP Head Studs
Division X return fuel hat with Twin 465lph pumps, -8 feed and -6 return, Division X Rails and fuel regulator
Mach 1 intake manifold
Built TR3650 and built rear with 3.55’s
Will eventually transition to MS3 standalone.
PFA
Setup:
CG Fab Single turbo hot: 1 5/8” Primaries, 3/8” flanges in mild steel, ceramic coated
CG Fab cold side
MM K member kit
Fresh CNC’d 9 Thread C heads with upgraded springs and bronze valve guides
Todd Warren Spec’d turbo cams
Billet Oil Pump and Steel Tensioners
ARP Head Studs
Division X return fuel hat with Twin 465lph pumps, -8 feed and -6 return, Division X Rails and fuel regulator
Mach 1 intake manifold
Built TR3650 and built rear with 3.55’s
Will eventually transition to MS3 standalone.
PFA