Is there a list of the all the offsets that fit? I got my brakes on today only to discover that my wheels rub. It looks like I'll need a 3/8 spacers to clear. Not bad but if the wheels poke out a lot, I'll be annoyed
What wheels are you running?
Is there a list of the all the offsets that fit? I got my brakes on today only to discover that my wheels rub. It looks like I'll need a 3/8 spacers to clear. Not bad but if the wheels poke out a lot, I'll be annoyed
Is there a list of the all the offsets that fit? I got my brakes on today only to discover that my wheels rub. It looks like I'll need a 3/8 spacers to clear. Not bad but if the wheels poke out a lot, I'll be annoyed
I had to use a 5mm spacer for spoke clearance on my cosmis 18 inch wheels.
The 17x8 bullitts, 99/01 Cobra and 94-97 Cobra wheels I tried did not have enough spoke clearance. I would need to run a spacer to mount them up fine.
with the 94-97 cobra wheels do you know how big of a spacer would be needed?
I am doing this upgrade on my 83 notch that is factory V8, will my power brake booster still work with this upgrade? If not can someone recommend one that will. Some people have said to use the 93 Cobra booster, but everywhere I look it is out of stock.Here is how the Calipers look from the factory:
View attachment 1575958
Here is the weight difference between the two:
View attachment 1575959
The Stock and Brembo side by side
View attachment 1575961
Between rim spoke and caliper:
View attachment 1576702
When Bleeding don’t forget to bleed the master cylinder:
View attachment 1576842
I am doing this upgrade on my 83 notch that is factory V8, will my power brake booster still work with this upgrade? If not can someone recommend one that will. Some people have said to use the 93 Cobra booster, but everywhere I look it is out of stock.
I'm no expert but I've been around 2 different fixed calipers like this and they could both be flipped from one side to the other by switching plug and bleeder.Cj, there is a left and right part number.
They appear to be the same to me. I haven't taken the caliper apart and seen the internals. I got my set from Scroggins Dickey also.Does anyone know if the right and left calipers are universal? Looks like you just flip bleeder screws and plugs to make caliper fit the other side.