Does anyone know....after the gauge update will the SCT tuner think the vehicle is a 2014 (for example) and try to apply a canned tune from a 2014?
How would I do this if my car is already tuned for pulley/intake with an SCT?
Cluster showed up and was in the car in 20 mins. Since I took the old one out and wires in the clock spring wires over the weekend. Programmed the cluster. Works perfect when I changed the as built to an auto cluster. The only down side to changing it to an auto for the trans temp and gear indicator is I lost launch control which really I would likely never use.
Who would you recommend getting a tune from at that point?You wont be able to use a "canned" tune. You will need a custom tune for it to run right and have the cluster work correctly.
Who would you recommend getting a tune from at that point?
Hey guys...I could use some help.
I did the gauge update with the ABS module and had no issues...well other than my car thinking it has a 5.8L when it really has a 5.4L.
I had a tune done for it because it no has a larger SC, injectors, CAI, TB, and BAP.
The problem is when I apply the tune I get a U201A:57-8B-ABS code - Invalid / Incompatible software component and the AdavanceTrak is off and ABS light keeps flashing.
I tried to PMI the ABS module but the error code is still present.
Any thought, suggestion, or ideas?
The tuner needs to be using a 2013/2014 strategy and change the displacement to 5.4 in the tune. I assume they are but that might be a simple mistake and is causing the problem.
You were exactly right on that. Needed to replace all mention of the 5.8 displacement in the tune.
No more TC or ABS lights.