In another thread about stainless brake lines a member posted that he also installed the Speed bleeders to his calipers. Has anyone else added the Bleeders to their Brembo calipers? If so, how many bleeders are there on the front calipers? What brand and part numbers did you use? Some Brembos have two bleeders per caliper. Before I order these I want to make sure that I get the correct ones and enough to change them all the way around the car. This will help with the switch over to stainless lines.
The problem that I have found is that NO ONE shows any bleeder part numbers past 2010 model years nor do they show anything for the Bermbo cars.
I called Speed Bleeders and this is what they suggested.
Speed Bleeders list their part numbers as,
Fronts SB1010
Rears SB1010S
Short bleeders on the rear brakes and standard length on the fronts.
The thread and the length are both factors in getting the correct bleeder.
The problem that I have found is that NO ONE shows any bleeder part numbers past 2010 model years nor do they show anything for the Bermbo cars.
I called Speed Bleeders and this is what they suggested.
Speed Bleeders list their part numbers as,
Fronts SB1010
Rears SB1010S
Short bleeders on the rear brakes and standard length on the fronts.
The thread and the length are both factors in getting the correct bleeder.